Page 1 of 1
VisionTV VT-9000HD ATSC remote info for Slingbox Remote
Posted: Sat Dec 22, 2018 8:37 am
by murf72
https://www.dropbox.com/sh/nfpv7rtsfmgd ... Hy0Wa?dl=0
VT-9000HD ATSC RCU.xlsx is provided from the manufacturer. VT-7000HD ATSC remote file is not compatible with VT-9000HD ATSC.
Posted: Sun Dec 23, 2018 4:36 am
by alanrichey
Most odd. I obviously built the VT-7000 but now I cannot find VisionTV as a manufacturer in the Logitech Harmony database. So at this stage I cannot help.
Posted: Sun Dec 23, 2018 12:29 pm
by vickyg2003
Okay, I tried to download and open the xlsx file, but I could only preview it in the browser. It looks like it is just the picture? I couldn't get it to download to see if there was anything more to it than just the picture.
Any other hex or anything like that.
At the bottom of picture 2 it says
C/C : 00BF
That appears to be the device/subdevice or static part of the signal.
Then the function codes seems to be the value displayed on the button ...
The old remote used an RC-5 protocol. The hex I'm seeing on the picture would be too much data to be RC-5.
The most common protocol is the nec1
So I'm thinking this might be a Nec1 device 0.191 signal
The HEX on the picture is NOT the HEX that goes in the RDMU
The Hex on the picture needs to be converted to decimal and then entered into the OBC column.
OBC
000 : 00 :: up
001 : 01 : down
002 : 02 : right
003 : 03 : left
031 : 1F : ok ......
016 : 10 : 0
017 : 11 : 1
018 : 12 : 2
019 : 13 : 3
020 : 14 : 4
021 : 15 : 5
022 : 16 : 6
023 : 17 : 7
024 : 18 : 8
025 : 19 : 9
014 : 0E : skip -
030 : 1E : skip +
112 : 70 : rew
113 : 71 : pause play
114 : 72 : fast forward
115 : 73 : record
116 : 74 : stop
117 : 75 : goto
009 : 09 : unmute ?
012 : 0C : mute
other labeled buttons
030 : 1A :
005 : 05 :
027 : 1B :
013 : 0D :
015 : 0F :
Hope that helps.
Posted: Fri Jan 25, 2019 1:32 pm
by murf72
Posted: Sun Jan 27, 2019 8:30 pm
by alanrichey