Page 1 of 1
Upgrade won't upload....get writeRemote returned -1 error
Posted: Mon Aug 13, 2018 11:17 am
by TK978
Trying to upgrade a Titan URC-2056-1 ....window pops up with writeRemote returned -1 . Anyone have any ideas? Tried searching that code but nothing?
Posted: Mon Aug 13, 2018 8:58 pm
by mdavej
Probably low batteries.
Posted: Tue Aug 14, 2018 6:35 am
by TK978
Thanks for the reply but did not work...changed batteries still get the message
Very frustraiting! Does it even if I try to upload the saved original device.
Posted: Tue Aug 14, 2018 7:13 am
by mdavej
Do another upload attempt, then post your rmaster.err file in the diagnostics area. It's located in the folder where you have Remote Master installed.
Posted: Tue Aug 14, 2018 7:27 am
by TK978
Posted: Tue Aug 14, 2018 9:26 am
by mdavej
If you can put the actual file in our diagnosis section, I can open it. Otherwise someone else will have to help you as that site is blocked by my work firewall.
Posted: Tue Aug 14, 2018 10:45 am
by TK978
I posted in diagnosis area Titled : URC-2056 Upload Issue by author TK978
Thanks
Posted: Tue Aug 14, 2018 11:19 am
by mdavej
In the future, just upload the actual file rather than have the download point to the same 3rd party URL. Please don't post the entire text contents of the file in the description. I have edited your file to meet these requirements.
https://hifi-remote.com/forums/dload.php ... e_id=25295
In any case, the relevant lines are these:
Code: Select all
Starting upload
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM3
Opened on Port COM3
Opened interface type 1
Interface opened successfully
Base address = $DC80
Data writing phase failed, bytes written = -1 instead of 4864.
Seems like the connection is fine. If fresh batteries didn't do the trick, then I don't know exactly what's going on. Maybe another expert will chime in.
Posted: Tue Aug 14, 2018 12:30 pm
by TK978
Thanks for all your help....maybe just an issue with that remote