Humax ESD-160C Remote
Posted: Wed Jul 11, 2018 5:59 pm
I need the .bin file for using Slingbox 350 with the Humax ESD-160C (Sky+ Pro Cable Receiver in Germany). Thanks in advance!
Page 1 of 2
Posted: Thu Jul 12, 2018 3:34 am
This is just a rebadged Sky Q box so use that.
Posted: Thu Jul 12, 2018 4:39 am
Thanks for your answer! I already tried out the .bin file for the Sky Q box. Unfortunately the file only works with my older Sky+ Box (Humax PR-HD3000C) but not with the new Sky+ Pro Receiver, which was released in 2017.
Posted: Thu Jul 12, 2018 4:47 am
Well the Logitech IR Database says the Humax ESD-160C uses the same IR codes as the original Sky Box. Nothing else I can suggest.
Posted: Thu Jul 12, 2018 5:29 am
But I can‘t control the Sky+ Pro Receiver with the original remote of the Sky+ Receiver, so they must have different IR Codes. I use the Logitech Harmony One and also had to set up both devices. But thanks for your efforts.
Posted: Thu Jul 12, 2018 6:11 am
If you PM me your Logitech logon details and tell me which device operates your box I can install it on my Harmony One and look at the signals.
Posted: Thu Jul 12, 2018 10:49 am
I've just sent you a PM 
Posted: Thu Jul 12, 2018 11:42 am
Received thanks, and installed on my Harmony One. Unfortunately it just confirms what I said before. Your Humax-DVR option sends the identical codes to the Sky Q BIN file. So you must be doing something wrong. Please read the installation instructions at http://www.rmrsoft.com/how_to_install_a ... ngbox.html IN FULL and try again.
Posted: Thu Jul 12, 2018 1:13 pm
Can you send me the link to the file I should use. Maybe I took a wrong one. I followed your installation instructions step by step, but sadly I wasn't succesful. I took the S2010_PL.bin file from https://www.hifi-remote.com/forums/dload ... e_id=13978
Posted: Thu Jul 12, 2018 1:58 pm
That's the right file. But I do wish you would do as I asked and follow the instructions. Hint: It is in Red and says IMPORTANT in BIG letters !!!
Posted: Thu Jul 12, 2018 2:37 pm
I did so and configured everything exactly like i was told in the instructions. But the result was the same as before. The setup was successful, BUT the new Sky + Pro Box still doesn't react to the IR commands, however my old Sky+ Box does. I don't think that I am doing something wrong, I'm not that inexperienced in slingbox. Maybe the IR codes in Germany differ from the US ones. I don't know why but it doesn't work 
Posted: Thu Jul 12, 2018 2:46 pm
OK, I give up.
Posted: Fri Jul 13, 2018 3:25 am
@Slinger90:
Global Cache Control Tower has a "Humax Sky ESD 160S" which, I guess, is the satellite version of Humax ESD-160C.
You can use IrScrutinizer to transform to RM format, and then RM to convert to Slingbox.
Global Cache Control Tower has a "Humax Sky ESD 160S" which, I guess, is the satellite version of Humax ESD-160C.
You can use IrScrutinizer to transform to RM format, and then RM to convert to Slingbox.
Posted: Fri Jul 13, 2018 10:20 am
Alan and Slinger,
I don't have any firsthand knowledge of the Harmony, but if I understand Slinger correctly, he has programmed his Harmony with 2 different setup codes, one for his Sky and one for his Humax. And the 2 codes only work the specific device, they don't work the "other" device.
Alan, when you look at his Harmony profile, do you see 2 different setup codes? And if so, are you saying that they look identical? Because that wouldn't make sense if they don't each work both devices. Is it possible that the device that you did sample was the old Sky one and not the new Humax one?
I don't have any firsthand knowledge of the Harmony, but if I understand Slinger correctly, he has programmed his Harmony with 2 different setup codes, one for his Sky and one for his Humax. And the 2 codes only work the specific device, they don't work the "other" device.
Alan, when you look at his Harmony profile, do you see 2 different setup codes? And if so, are you saying that they look identical? Because that wouldn't make sense if they don't each work both devices. Is it possible that the device that you did sample was the old Sky one and not the new Humax one?
Posted: Fri Jul 13, 2018 10:35 am
Rob
No, when Slinger PMd me his log on details he confirmed that the one that operated his Humax was called 'Humax DVR'. So that was the one I checked, and it gave the same result as when I had loaded the Humax box directly from the Logitech database itself, i.e RC6-6-28 0.2074. That is the same as the Sky Q bin file so I have no idea why it doesn't operate his box.
And, of course, he has refused to follow the instructions and answer the 12 questions so I am a bit stuck,
No, when Slinger PMd me his log on details he confirmed that the one that operated his Humax was called 'Humax DVR'. So that was the one I checked, and it gave the same result as when I had loaded the Humax box directly from the Logitech database itself, i.e RC6-6-28 0.2074. That is the same as the Sky Q bin file so I have no idea why it doesn't operate his box.
And, of course, he has refused to follow the instructions and answer the 12 questions so I am a bit stuck,