Page 1 of 1
LG 42LH30 TV Discrete Codes?
Posted: Sat Dec 09, 2017 7:58 am
by csete
I feel like I had these codes at one point, but I can't find them at this point. I'm in need of the discrete codes for the inputs on this TV.
Any pointers appreciated.
Thanks,
Craig
Posted: Sat Dec 09, 2017 3:41 pm
by mdavej
Posted: Sun Dec 10, 2017 10:56 am
by csete
Perfect. Thank you!
Posted: Sun Dec 10, 2017 4:51 pm
by csete
It has been a (long) while since I did much JP1 stuff. I just tried to use these codes as a Keymove in RMIR. Is that correct? I attempted to set the HDMI1 and HDMI3 discrete codes on Macro1 and Macro2 respectively (for both TV and STB modes). My remote is a Potenza BC4 (351601) from my local cable company that I worked via the forums to get proper RDF and map/image files earlier this summer.
Any help appreciated!
Thanks,
Craig
Posted: Sun Dec 10, 2017 6:39 pm
by mdavej
Post your RMIR file so we can take a look.
Posted: Sun Dec 10, 2017 7:06 pm
by csete
mdavej wrote:Post your RMIR file so we can take a look.
Here you go. Thanks for taking a look.
https://www.hifi-remote.com/forums/dload ... e_id=25026
Craig
Posted: Sun Dec 10, 2017 8:38 pm
by mdavej
Close, but you're using the wrong values. If you look at the codes in the linked device upgrade, you need the numbers in the EFC column, not the OBC column. So edit each of your macros, pick the EFC-5 radio button and replace 233 with 81 and 206 with 46.
Posted: Mon Dec 11, 2017 6:01 am
by csete
Well shoot. I hadn't noticed that the first page of that spreadsheet was all OBC codes. The changes you suggested work perfectly. Thanks so much!
Craig