JP1 Remotes

1. Device: Yamaha RX-V363
2. Type of device: AV Receiver
3. Year: 2008
4. JP1/UEI Remote model: Atlas OCAP URC 1056
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
10. Learning remote question? N/A

I've got a new Yamaha receiver that is working with setup codes 0176 and 1176 for 99% of the keys I want. I can't seem to make the power keys work, either discrete on/off or toggle. I've tried upgrades from the files sections for RX-V430, RX-V595, RXV-657, RX-V640 and RX-V757 and all work partially for volume, mute, and others but none work for power control.

I did find a post for a Pronto code that works as discrete on and off for a Home Automation IR device called an Applied Digital Ocelot, so now that device CAN turn the power off and on. The problem is I have no idea how to get the pronto codes into a format for my JP1 remote.

The pronto info is as follows:

on: 0000 006D 0022 0002 0155 00AA 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 05ED 0155 0055 0015 0E47

off: 0000 006D 0022 0002 0155 00AA 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 05ED 0155 0055 0015 0E47

Any suggestions?

Those Pronto codes translates as follows:

On:
NEC1, Device=126, OBC=126

Off:
NEC1, Device=126, OBC=127

You can usually convert long form Pronto hex to info you need for JP1 using IRTool. You may also need DecodeIR.dll and put it in the same folder.

Thanks, I was able to download IRTool and see how the conversion works. I created an upgrade with device code 126 and now have working discrete power keys on my remote.

Does anyone know if there is a toggle power code for this receiver? I tried all the EFCs for device 126 and didn't find one. I may try 127 as well when I get time, I understand many of the Yamaha receivers use 122, 126, and 127.

For now at least I can turn the power on and off!