Page 2 of 2
Posted: Mon Oct 24, 2005 9:43 pm
by zaphod7501
All of the upgrades in the file section are for the 34 button Hauppauge silver remote { RC-5 (protocol id "00 e8") dev1= "31" (fixed data 00 40 00)}. You (PGBELL) appear to have the new 45 button remote (dev 30) which should have fixed data "01 41 01". The old black remote was dev 0 (fixed data "1f 5f 1f").
At least those are the fixed data figures that RM generates for those parameters.
Posted: Tue Oct 25, 2005 6:56 am
by underquark
An observation: the hex values decline by 4 on each line except the one with the error. It is almost as if the functions columns have had a line inserted causing them to shift down. Don't know why this should occur on the OP's machine but not the Robman's if the normal method of loading KM files has been adhered to.
My suggestion - open the upgrade file as a text file using Notepad and chose Edit...Select All followed by Edit...Copy (or use the keyboard shortcuts [ctrl]-a [ctrl]-c). Then go to KM and select the Setup tab and click on the Import button. Ensure also that you don't save the whole KM spreadsheet after each use but rather just save the upgrade file.
http://img435.imageshack.us/img435/208/function2gs.jpg
Posted: Tue Oct 25, 2005 3:31 pm
by PGBELL
HI,
OK, this happens in any cell I put obc code 002. from that cell on down the whole chart is whacked out. I am building a new P4 tonight, it was time to upgrade my old 1.6 gig. anyway. I will load km and all the other programs needed and I will let you all know how things work out. thanks for all the great help and info.............Pete
P.S. I do know how to build an upgrade. I loaded my 8810 last year with this same computer, but it must be sick now!!!!!!!!!!! PG
Posted: Tue Oct 25, 2005 3:57 pm
by The Robman
I would still be curious to see the saved KM with the error showing. If when I open this version of KM on my machine, the error still shows, I can see which formula is causing it and what values are in the formula.
Posted: Tue Oct 25, 2005 4:23 pm
by Mark Pierson
What version of Excel are you using?
Posted: Thu Oct 27, 2005 8:34 pm
by PGBELL
HI,
OK, I will post a copy of km for you to look at. I am using excel 2003.
Ver 11.5612.5606. almost ready to power up the new p4. I will keep you posted................Pete
Posted: Thu Oct 27, 2005 8:43 pm
by PGBELL
HI,
I think I just posted a copy of my bad KM file for you to see. Let me know if you figure out anything. Thanks.............Pete
https://www.hifi-remote.com/forums/dload ... le_id=2356
Posted: Thu Oct 27, 2005 9:13 pm
by The Robman
The Robman wrote:Maybe you should save your copy of KM, with the bad data still in it, under a new name, then zip it and load that into the Diagnosis Area for one of us to look at. (and don't forget to post a link to the file).
Pete, I was asking you to post the entire KM spreadsheet, not just the upgrade text file. I can open your upgrade using my copy of KM just fine.
Posted: Thu Oct 27, 2005 10:46 pm
by PGBELL
Hi Rob,
OK, I re-posted the whole spread sheet this time. I hope this is what you wanted!!.....................Pete
https://www.hifi-remote.com/forums/dload ... le_id=2356
Posted: Fri Oct 28, 2005 6:15 am
by The Robman
Thanks, that was what I wanted. However, it also opens and displays just fine on my PC, so the problem is something local to your PC.
Posted: Fri Oct 28, 2005 8:20 am
by PGBELL
Hi Rob,
Thanks for having a look at the file. I fired up my new p4 and tried the file, all went well, it loaded fine and the upgrade seems to have loaded in ir as well. I can't figure out whats going on with my old PC. O well, out with the old and in with the new. thanks for everybody's great help!!!!!
Should I remove my file from the diag. area? If so how do I delete a file from the forum?...............................Thanks Pete
Posted: Fri Oct 28, 2005 9:48 am
by The Robman
PGBELL wrote:Should I remove my file from the diag. area? If so how do I delete a file from the forum?
Yes please, use the delete button:
