JP1 Remotes

Thanks. It is under Slingbox 's list as Cable box and the name is CABLE TV HK OTHER CODE O. On the remote itself there is a number SDCV0006

I don't see an HK, I see an HIK and and an HKBN bbTV HK. Which is it ?

look manufacturers starting on C and there is one named CABLE TV HK

OK got that. It's pretty generic code set, not surprised you have found so many other boxes that almost work.

Right, now to track down the exact codes for each button. Same as before, https://www.hifi-remote.com/forums/dload ... e_id=12981 has a C2011 BIN file, so install it and tell me EXACTLY what each of the buttons does.

Thanks again. This file worked better. Here are the behaviors:


POWER nothing after first hit. Display "Leaving time shift record, waiting"
PLAY nothing
REWIND Display Language audio
STOP Display Channel list. When hit 2nd time goes to the selected channel
FAST FORWARD Change from Radio to Tv and vice versa
SKIP BACKWARD nothing
PAUSE nothing
SKIP FWD nothing
RECORD Turns Volume up
GUIDE Tune Channel "0"
MENU Display" enter time shift, waiting" after first hit. Second hit display icon for pause. Third hit display icon for play
INFO Tune Channel "3"
CURSOR LEFT nothing
CURSOR UP Change resolutions after each hit from 480i to 1080p(60 htz)
CURSOR RIGHT nothing
CURSOR DOWN Display " leaving time shift record, waiting"
SELECT/OK(space) nothing
CHANNEL UP Change screen sizes from Auto to 16:9
CHANNEL DOWN Display language of Subtitles
PAGE UP nothing
PAGE DOWN nothing
EXIT Display playing time top left corner
RED nothing
GREEN nothing
YELLOW nothing
WHITE nothing
DIGIT 1 nothing
DIGIT 2 nothing
DIGIT 3 Display PVR Time scheduling table
DIGIT 4 nothing
DIGIT 5 Tune Channel "3" and move away PVR scheduling created with digit 3
DIGIT 6 Change channels forwarding
DIGIT 7 nothing
DIGIT 8 Display "no teletext information"
DIGIT 9 nothing
DIGIT 0 nothing
LAST CHANNEL tune channel "9"
ENTER nothing
Channel up Change screen sizes from Auto to 16:9
Channel down Display language of Subtitles

FOR THE CUSTOMS OPTIONS NONE WORKED IN ANY KEY

That's disappointing, I was hoping for more. Makes me concerned that we have the wrong device number and we are just getting coincidental hits.

Still. worth continuing. https://www.hifi-remote.com/forums/dload ... e_id=12981 now has C2012 and C2013 which takes up to Code 160.

Don't bother reporting any buttons that do nothing, just the ones that work.

I am working on these files. I would like to know how to upload a Excel spreadsheet in my replay in the forum. Could you give me some directions

You have to put it in the Slingbox Work Files area why I put my BIN files

Thanks. I sent to that area the assessments of the keys with the files C2011,C2012 and C2013

OK. Again a bit disappointing. The fact that nothing works in C2013 leads me to believe that all the codes lie below 100, but there are still some missing,

One odd fact is that you haven't found any buttons corresponding to the arrow buttons. Does your remote not have them ? I am assuming you has the TV in a mode where the arrow keys would actually have an effect, like the Guide ?

And we are missing "4" & "6" & Channel Down. Can you run through all 3 files again and make sure they aren't there ?

I assume you don't have Play/Pause/Stop... buttons ?

Any other buttons we haven't found ?

Thanks again. Yes, my remote has the arrows buttons and they have effect on the device including the guide.

I sent to work files the retest made to the three files. There are some changes as you will notice in red ink. The buttons POWER and MENU deal with record and playing including pause, rewind and forwarding.

As you see the function of playing/record/pause.... can be performed only in combination with the double hitting of the POWER button. In other words is the change from TV to PVR

I'm afraid we are wasting our time here. Yoiu have to remember this is just a burst of 1s & 0s and therefore there will always be scenarios where buttons will be triggered by accident. I can see no logical pattern here at all so I susect we are chasing cooincidences.

Sorry, but nothing more I can do unless you can find someone with a Harmony programmable remote we can use to test the signal.

Well, thank you. You has been very kind and helpful. I posted a thread at the Slingbox community forum too; maybe some leads could arrive. Thanks for the suggestion over the Logitec Harmony people. I will keep you posted.

Hi there, Merry Christmas.
I have been searching for DVB-T receivers over the internet, and I found a brand SIGNAL HD- 507 and HD-527. They work under the satellite terrestrial technology and mostly marketed in Polonia. All the features of the remotes are exactly the same as the MULTITECH I have.
I also found that in the Slingbox's remote list they offer the models SIGNAL HD-507 and HD-527, but in the generic skin. Although some functions work, I still have the same problems that we found with C2012 and C2011 bins.
My question is: Is there any way to load the original version of the SIGNAL remotes in the Slingbox list replacing the generic ones currently on file?

In addition, I tried the HARMONY software, and I found the brand SIGNAL is available with no restrictions for the models DH-507 and DH-527. In particular DH-527 has PVR feature, which I have in my MULTITECH. So, I will more interested in the HD-527
Because in a previous post you mentioned that the remotes you have coming from the HARMONY database, I would really appreciate if you could take a look of this remote and try to upload it in the .bin format that work in the Slingbox list.
Thanks