Page 2 of 2
Posted: Sat Feb 27, 2010 12:55 pm
by burchis
vickyg2003 wrote:Try efc 00117 for TV
The setup code you are using JVC/0074 is a JVC device 163 code.
So from this list of source type codes. Note that the USB source uses a different device # so we can't use it with this particular setup code.
Code: Select all
--Function -----------EFC --------Device
* source tv 117 163
* source dbs 203 163
* source vcr 121 163
* source dvr/dvd 171 163
source sirius
* source fm/am 059 163
- source usb 155 175
* source aux 164 163
Since your remote is a JP1.3 remote, the efc's are really 5 digit, so they need to have two 0's prepended to them.
Would I be asking too much for you to post the complete discrete code list from the above file? Everything you listed works for my receiver. So I am assuming that everything for EFC 163 would be correct.
Thanks.
Posted: Sat Feb 27, 2010 1:05 pm
by vickyg2003
I'm guessing this is a cousin of the Comcast 1067Bx3 (another cable JP1.3 remote)
If I'm correct, you'll be able to create any JVC codes that use devices 3 ,31, 67, 111, 163, 239
Check your manual and see if these codes are listed for your JVC equipment.
Audio/[3] 0074 JVC 163
Audio/[3] 0331 JVC 163
TV/[1] 0053 JVC 3
TV/[1] 0731 JVC 31
TV/[1] 1253 JVC 3
Video/[2] 0067 JVC 67
Video/[2] 0558 JVC 239
Video/[2] 0623 JVC 239
Video/[2] 0867 JVC 67
Video/[2] 1164 JVC 111
Video/[2] 1348 JVC 239
Video/[2] 1416 JVC 239
Video/[2] 1440 JVC 239
Posted: Sat Feb 27, 2010 1:16 pm
by The Robman
burchis wrote:I have done more digging and the remote I use is from Insight Communications and has 2067BG3 -xxxx-xxxx-R stamped inside the battery compartment. I am assuming that my remote is URC2067BG3. Maybe someone can help me determine what remote I have.
I did some searches based on all those terms but couldn't find the remote. Could you do me a favor and get the remote to blink back it's signature.
Here's how you do it:
1) Press and hold the SET button, 2 flashes
2) Type 983, 2 flashes
3) Type 1, count the flashes
4) Type 2, count the flashes
5) Type 3, count the flashes
6) Type 4, count the flashes
Note: no flashes counts as zero
The count of flashes from each of steps 3-6 gives us the signature. For example, if you get 3 flashes in step three, 4 in step five, none in step six and 5 in step six, the signature would be 3405.
Posted: Sat Feb 27, 2010 1:24 pm
by burchis
The Robman wrote:burchis wrote:I have done more digging and the remote I use is from Insight Communications and has 2067BG3 -xxxx-xxxx-R stamped inside the battery compartment. I am assuming that my remote is URC2067BG3. Maybe someone can help me determine what remote I have.
I did some searches based on all those terms but couldn't find the remote. Could you do me a favor and get the remote to blink back it's signature.
Here's how you do it:
1) Press and hold the SET button, 2 flashes
2) Type 983, 2 flashes
3) Type 1, count the flashes
4) Type 2, count the flashes
5) Type 3, count the flashes
6) Type 4, count the flashes
Note: no flashes counts as zero
The count of flashes from each of steps 3-6 gives us the signature. For example, if you get 3 flashes in step three, 4 in step five, none in step six and 5 in step six, the signature would be 3405.
I ran the test twice to make certain and got 3039 each time. Can't wait to see what my hidden message tells me. lol
Posted: Sat Feb 27, 2010 1:35 pm
by burchis
vickyg2003 wrote:I'm guessing this is a cousin of the Comcast 1067Bx3 (another cable JP1.3 remote)
If I'm correct, you'll be able to create any JVC codes that use devices 3 ,31, 67, 111, 163, 239
Check your manual and see if these codes are listed for your JVC equipment.
Audio/[3] 0074 JVC 163
Audio/[3] 0331 JVC 163
TV/[1] 0053 JVC 3
TV/[1] 0731 JVC 31
TV/[1] 1253 JVC 3
Video/[2] 0067 JVC 67
Video/[2] 0558 JVC 239
Video/[2] 0623 JVC 239
Video/[2] 0867 JVC 67
Video/[2] 1164 JVC 111
Video/[2] 1348 JVC 239
Video/[2] 1416 JVC 239
Video/[2] 1440 JVC 239
You are correct in your assumption. I found exact cross reference for each of your listings.
If interested I can send PDF of complete setup code sheet from my Insight remote.
Thanks again.
Posted: Sat Feb 27, 2010 1:56 pm
by The Robman
burchis wrote:I ran the test twice to make certain and got 3039 each time. Can't wait to see what my hidden message tells me. lol
That confirms that your remote is the same as the Comcast URC-1067Bx3 remote, as Vicky suspected.
Posted: Sat Feb 27, 2010 4:10 pm
by vickyg2003
You should be able to open this yourself, but here are the codes from that upgrade. Anything with a device of 163 you should be able to use, but there are no combo codes nor any setup codes that use device 175, so you can't implement those without a cable. If you use the lookup tool, choose Comcast 1067bx3 as your remote.
0074 codes wrote:EFC - Button
00187 - sleep
00059 - source fm/am
00117 - source tv
00121 - source vcr
00122 - power toggle
00247 - discrete power off
00244 - mute
00248 - discrete power on
00246 - vol up
00250 - vol down
00217 - 1
00215 - 2
00219 - 3
00212 - 4
00216 - 5
00214 - 6
00218 - 7
00085 - 8
00089 - 9
00087 - 10
00090 - plus 10
00171 - source dvr/dvd
00164 - source aux
00038 - l surr +
00042 - l surr -
00229 - surround
00231 - 0
00203 - source dbs
00133 - up arrow
00137 - down arrow
00135 - left arrow
00139 - right arrow
00132 - audio input
00005 - tuning up
00009 - tuning down
00011 - memory
00189 - d. eq level +
00125 - d. eq level -
00093 - d. eq freq
00114 - test
00237 - center +
00241 - center -
00240 - subwfr +
00210 - c. tone
00077 - r surr +
00081 - r surr -
00080 - subwfr -
00082 - cc converter
Posted: Sat Feb 27, 2010 4:16 pm
by burchis
vickyg2003 wrote:You should be able to open this yourself, but here are the codes from that upgrade. Anything with a device of 163 you should be able to use, but there are no combo codes nor any setup codes that use device 175, so you can't implement those without a cable. If you use the lookup tool, choose Comcast 1067bx3 as your remote.
Thanks Vicki for these codes and thanks to others for their help.
Posted: Sat Feb 27, 2010 5:20 pm
by burchis
vickyg2003 wrote:You should be able to open this yourself, but here are the codes from that upgrade. Anything with a device of 163 you should be able to use, but there are no combo codes nor any setup codes that use device 175, so you can't implement those without a cable. If you use the lookup tool, choose Comcast 1067bx3 as your remote.
Ops, the discrete code for the down arrow didn't get copied in your cut and paste, could you please let me know what it is?
Thanks.
Posted: Sat Feb 27, 2010 5:51 pm
by vickyg2003
00137