Page 2 of 2
Posted: Wed Oct 28, 2009 4:25 pm
by FastKatt
The problem with the AUX Work Around is you're have to be in AUX Mode for it to work...
I'm glad I got Comcast to give me the updated code
Posted: Wed Oct 28, 2009 11:40 pm
by 3FG
FastKatt,
What setup code are you using together with EFC 00083?
Posted: Thu Oct 29, 2009 6:23 am
by FastKatt
1) Select Cable Button
2) Hold SETUP, 2 Flashes
3) Type 994, 2 Flashes
4) Tap SETUP
4) Enter the EFC 00083
5) Tap the button to be programmed [A]/[Triangle], 2 Flashes
Posted: Thu Oct 29, 2009 7:29 am
by mdavej
What's the CBL device setup code you're using, 0476 or something like that? If you don't remember, you can do a code blink back as follows:
PRESS the device (TV,VCR,CABLE,etc.) button - RELEASE
PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
PRESS 9 - 9 - 0.
PRESS 1, carefully COUNT the number of blinks. (1st digit)
PRESS 2, carefully COUNT the number of blinks. (2nd digit)
PRESS 3, carefully COUNT the number of blinks. (3rd digit)
PRESS 4, carefully COUNT the number of blinks. (4th digit)
No blink means zero
Posted: Sat Oct 31, 2009 8:34 pm
by FastKatt
Not sure the code is right, Wife says it skips 5min, not 30sec...
Posted: Sat Oct 31, 2009 8:38 pm
by FastKatt
Not sure the code works,...
My Wife says it was jumping 5min, not 30sec
Posted: Sun Mar 14, 2010 4:40 pm
by tennessee titan
I looked at all my comcast upgrades for the moto boxes and I could not find an 00083 anywhere. 00173 works for me on all 3 variants of comcast remotes (grey setup, red setup, and new dark grey remote).
I am using 0476 setup modified.
I used this upgrade on the older DCH3416 and the new DCX3400.
30 second skip
Posted: Thu Jul 15, 2010 12:32 pm
by grouch50
I have read all the responses for programing the new control (red) with the DCX3400. Help. I am really a beginner and need instructions for a dummy to follow so I can't screw it up.
Can you all help?
Re: 30 second skip
Posted: Mon Sep 13, 2010 11:42 am
by The Robman
grouch50 wrote:I have read all the responses for programing the new control (red) with the DCX3400. Help. I am really a beginner and need instructions for a dummy to follow so I can't screw it up.
Can you all help?
Do this...
vickyg2003 wrote:Here's how you program an EFC on the RED OK-button remote...
The red button remote uses 5 digit setup codes. The gray button remote instructions will be different.
1)Select Aux
2) Hold setup 2 flashes
3) type 01376 2 flashes
1) select Aux button
2) Hold SETUP, 2 flashes
3) Type 994, 2 flashes
4) Tap SETUP
4) Enter the EFC 00173
5) Tap the button to be programmed [Cbl][triangle], 2 flashes
Posted: Mon Sep 13, 2010 5:10 pm
by tennessee titan