Page 2 of 2
Posted: Fri Mar 17, 2017 7:27 pm
by The Robman
Coolerl, have you tried the latest files posted by Barf and Dave (They should be the same)? They have OEM2 set to 125 (which matches your remote binary) whereas the Sling binary that you posted has it as 16
Posted: Mon Mar 20, 2017 4:59 am
by coolerl
Barf wrote:Turned out that I decided it was worth fixing the RC6 import after all.
Issue., Feel free to try
test version.
The raw file did not import directly in IrScrutinizer, because there was a new token. I fixed that in the fix above too. After that, it imports fine. Turns out that the signals are MCE, D=38, S=125, and F=12 (for power). Even the (MCE-)toggle is there, and as expected, is 0 for some signals and 1 for the rest.
With the fix, the original file also imports fine. I exported the commands in Remotemaster/ImportOnly format, read it into RM, selected protocol MCE. Deviceno was correct (38), had to set OEM2 to S (=125).
Try this.
Thank you Barf!
Works like a charm!
The IRTrans identifies the codes sent by Sling identically as the ones sent by the remote
0 : skyworth-HC7201- power [S11101010000000011111010010011000001100]
0 : skyworth-HC7202- 1 [S11101010000000011111010010011000000001]
I just changed the RV chip to PL and assigned a different remote model as it was more convenient to me.
Great job!
Posted: Mon Mar 20, 2017 6:28 am
by Barf
That is great news!
And thank
you for helping me improving IrScrutinizer. Remember, I can only fix the problems I am aware of...