JP1 Remotes

I need some help to put together a RM or KM file for the above Sony to be used with a 15-2117 Radio Shack remote. Even IR learnfunction seems not to work for the Sony remote. Thanks

After Barf was good enough to create a device file for me for an Aton DLA-4 remote controlled speaker switcher from the CCF codes, and modified the latest RMIR version (2.04 Build 10), the upload from my RMIR with the new device included won't be accepted. I get a message that Elan protocols won't ...

I really appreciate your creating the load file for me. I commit to learning to fish on my own by reading the RIMR Wiki and upgrading my old IR KM skills. I hadn't had any major changes to my 15-2117's in a few years and as a result got rusty. .

I downloaded ver 2.04 . Does this update have the ability to decode/incorporate one of the code sets here from Aton's site ( http://www.atonhome.com/IRCodes.html )

If so, what exactly do I do to add/or select the righ the protocol (assuming I need to do so) and the device codes.

I'm not familiar ...

I am trying to use my RS 15-2017 to work with a newly acquired but old stock Aton DLA-4 remote controlled speaker switch. They have links to Pronto , RTI and Hex codes at http://www.atonhome.com/IRCodes.html
but it's beyond my skill set to use them to create a file that KM or RM can use.

Can ...

That was it, I didn't have all the files in the right directory.

I' m an old Keymaster guy so still a novice with RM.

Works great now,

Thanks

That is the code I typically use but I don't see it in the drop down menu on remote master when I load your file. I see Producer models and URC models which I believe are who made and are similar to the radio shack models but I don't see a choice for the RS models . Although when I used the one ...

Thanks for quick reply. How do I use this RM file with a Radio Shack 15-2117 ? I tried the URC 9910 (old and new) and while at least this remote type took Protocol 0162 when uploaded the key functions were way off from what they should be (right isn't the right key but is the exit button etc.). Is ...

Added a 4th DVR. How can I modify any of the RM files for the HR20/22 for a receiver/remote code of 0004? I'm guessing it is a change to the Fixed Data cell on the setup tab but not sure what to enter for a code higher than 3.

There doesn't seem to any recent Sharp tv postings. Anyone know which if any of the listed ones would work with their new 2011 70 inch line or can post one?

Thanks

The Robman wrote:The old parallel cables sometimes require a bunch of battery tricks to make them work.

Try...

• Fresh batteries
• Old batteries
• No batteries
• Put one battery in backwards

I "give". Buying a new cable!

Having not used the JP1 for a while now I'm confused about which way the cable was to be attached to the remote (15-2117). Please confirm for me: if holding the remote upside down/open with JP1 female connector on right, is the parallel port ribbon cable's plug's "looped wire" down (cable attaching ...

Well, the OP describes this a parallel interface, so the com port isn't relevant. At this point, I would suspect a problem in the interface itself. Why not use the troubleshooting directions in "Building a Simple Interface" ?

Having not used the JP1 for a while now I'm confused about which way ...

Suddenly I can't seem to get a connection when using my parallel JP1 cable with my 15-2117.

Tried different remotes and none can now connect. Re-booted. Keep getting the same message

What to do??
Have you tried fresh batteries?

Yes, and multipe remotes.
Rebooted, pulled reinserted the ...

Suddenly I can't seem to get a connection when using my parallel JP1 cable with my 15-2117.

Tried differnt remotes and none can now connect. Re-booted. Keep getting the same message

What to do??