JP1 Remotes

yes that is what im doing Just wanted to be sure Im not alone
Thanks for the reply

First thanks for the Extender it works great.
Question is: The backlight seems to get disabled when when I press certain buttons like TV device, CBL device, and mute, and a CBL>>OK/Select. All of these keys have LKP assigned, but so do other keys that dont have that affect.
TV and CBL device keys ...

When I say "loop" I mean the led continues flashing for a minute or so then just stays on and the batteries then have to be removed to reset.

You Got It
Works good
Thanks
Now I found one other minor issue > the "Fav" key has unpredictable results
when it is not mapped. It seems to loop the remote. the shift and x-shift seem to do the same I just mapped it to a macro and it is fine. It does not appear to do it in all modes like "CD" "AUD ...

I am still using the extender if I notice any thing else I will post
but so far it is great (except for those 2 things)

Yes it works normally I was using it unextended until this weekend I bought a 8910 and got playing with it and then seen the A7 extender and tried it out
The extender is working well and the workaround is simple enough. Although
I am finding it hard to believe no one else has had the same issue ...

If press any keys after reset, then press SAT, then M1, then TV, is everything OK?

If that's the case, then it sounds like a register isn't getting reset properly on O_ keys.

the code will go to the device that had the last key press
so if you go to "vcr" and press "1" then goto "sat" and ...

I have uploaded a file there is a note describing the file on the general page
https://www.hifi-remote.com/forums/dload ... le_id=5629
I have tested it and an sure it is not me BUT Ive done that before.

Thanks for your Interest

Yes I had a good exaple set up for trouble shooting I will recreate it and post
are there any upgrades/codes that would be best for you
Echostar 301 sat and Sony tv code "0000" is what I have

DUH
I must have looked at that a hundred times and did not see it thanks for the quick response Ill try it later but am sure that it what the problem is

I was sure I was doing something Dumb
Thanks

And No you are not in tv mode you ae in sat mode but the tv mode chages
to the new code if you dont ...

Hi vickyg2003 I posted the file
https://www.hifi-remote.com/forums/dload.php?action=file&file_id=5628
It is kind of complicated but if your into it please do
The extender is working good but it is just the two issues.
And ir file is still a work in progress

Good luck selling your house my wife ...

I'm using the extender all is well but cannot seem to get the Aux-2 device
to work I am using “p-aux2 v-aux2” and so on, but when I use the macro nothing changes It remains with the last keyset active.
also
Device multiplex bug -- last active device will get executed on device multiplex eg last key ...

Is there a device multiplex protocol for the URC_6690/Hybrid available
Or
Can I make one
There is one for 10820. Tried it on 6690 but no go.
Can it be modified for 6690
Thanks

I see one posted in the Diagnosis Area
will it work on a 10820
and is there an RDF available
Love to try it even if it is Beta

The Robman wrote:I'm guessing that the OFFSET (ie, 3) will be consistent, not the numbers themselves, so if the generated value was "15" the correct value would probably be "18", etc.

Ok If I find different I will post