JP1 Remotes

WHOMPUS,
Thanks for your help! I tried the file you suggested and it worked perfect. You saved me a ton of time. I would like to understand if my posted data file is able to be used in building an upgrade, or is the file no good as far as learned codes.
Thanks
Pete

HI Folks,
I learned 21 buttons from my IR keyboard which is made by ADESSO, model number ack-573pb-0000. my remote is a 8811. all the signals I learned to my 8811 work perfect. My trouble is trying to figure out the signals from the remote program. the signals for each learned command match the ...

Hi
I have a mythtv pvr that runs Linux. I would like to know what ir keyboard you guys would recommend I buy? I want to load the keyboard to my 8810 remote. In reading some of the other posts, it seems that some ir keyboards are tricky to learn to JP1. I would like the easiest one for this app. any ...

Hi Rob,
Thanks for having a look at the file. I fired up my new p4 and tried the file, all went well, it loaded fine and the upgrade seems to have loaded in ir as well. I can't figure out whats going on with my old PC. O well, out with the old and in with the new. thanks for everybody's great help ...

Hi Rob,
OK, I re-posted the whole spread sheet this time. I hope this is what you wanted!!.....................Pete


https://www.hifi-remote.com/forums/dload ... le_id=2356

HI,
I think I just posted a copy of my bad KM file for you to see. Let me know if you figure out anything. Thanks.............Pete



https://www.hifi-remote.com/forums/dload ... le_id=2356

HI,
OK, I will post a copy of km for you to look at. I am using excel 2003.
Ver 11.5612.5606. almost ready to power up the new p4. I will keep you posted................Pete

HI,
OK, this happens in any cell I put obc code 002. from that cell on down the whole chart is whacked out. I am building a new P4 tonight, it was time to upgrade my old 1.6 gig. anyway. I will load km and all the other programs needed and I will let you all know how things work out. thanks for all ...

Robman,
The file I am using is the one mark posted above. but here is a link to it anyway. I get the same results when I try loading the learned codes from the original silver remote. as long as I leave the obc (002) for button function 2 out the cell, the file loads in km correctly after that ...

HI,
Thanks for the info about the file already built. I still can't get this to work right. I tried a new copy of rm and still had the same trouble as my screen shots show with the error in it. than I tried to reload excel and that did not help. after many hrs of trying to figure out what my ...

Hi,
Thanks, I will try a new copy of km, also do you think I should erase excel and reload it as well?.........Pete

Hi,
Thanks for your help. Here are links to screen shots of my upgrade tabs:
1: setup tab
2: functions tab
3: buttons tab
I hope this will help with solving my problem........Thanks Pete

http://img435.imageshack.us/img435/2803/buttons9lc.jpg

http://img435.imageshack.us/img435/208/function2gs ...

Hi,
Yes when I enter the obc codes, km adds the efc and the hex code.
I entered all the number buttons obc's on the functions tab, when I switch to the button tab the only functions in the F column I can choose from are the number 0 and 1 functions, also the b column on the functions tab is bright ...

I have urc8811 and my JP1 cable and the factory remote from my happauge pvr 250. I learned the signals to my 8811, no problem, than I went to key-master and started to build the upgrade. this is where my trouble started. my learned codes protocol said RC-5. after selecting the remote type(8811 ...

I am using JP1 to program my 8810w, all is great. I would like to buy a new 8810w or a replacement model. It needs to have the JP1 connector in it. I tried wal-mart and best buy, with no luck. can anybody please let me know where I can get this remote or a close match for this model. is their a list ...