JP1 Remotes

Sorry friends, My Mistake the last time I used my interface was for OSN JP 1.4, AND I Had been advised by Graham to change RTS Pin 2 To Pin 1 in the 6 PIN Header, due to some different eeprom in the OSN Identical remotes, so i forgot to reverse it back, now when i saw Connection Pin Pictures, I ...

Hello Friends, I was on a break, so my last upgrade i did was more than a year ago, now i need an upgrade so i took out a couple of interface which i had and tried with older RMIR 3.02 AND 3.12, But i am getting no remotes found, where as the last time it was working perfectly fine, So i did fresh ...

If it supports 994, I'd like you to program some keymoves.
If it supports 995, I'd like you to program some macros.
If it supports 980 or 981, I'd like you to do a reset.

994-not working only one blink @TV OR STB
995-also not working same as above
980-working getting four blinks
981-working ...

Hi,I have two TalkTalk Youview remotes with me URC179251-02R00 & URC179252-01R00, unfortunately none of them is working with the RDF-MAPS, already made by someone, which is there in RMIR Database, I am getting no remote found , when i click on download, where as my other Tele2 remote is working fine ...

I had saved an original back-up of OSN Remote.rmir file way back from the first OSN remote, but can't upload,says remote write fail, but i uploaded 3579.ir (Raw Download), No Luck, one remote flashes twice, and another flashes 2+5 Blinks. Anyone wants to see rmaster.err file? so i upload in ...

Am I right that you got 2 blinks after holding TV and OK, but 1 blink after typing 995? Yes that's right.

I did 981 in one Osn 1.4 and in another i did 980, I got 4 blinks in both remotes, I did 991 factory reset which the Osn manual says, got 4 blinks.
But all the three remotes if I press any ...

i did by holding the TV_Power and OK buttons together & 995 ,but i am getting only one blink in both of my Osn 1.4 remote, then i removed the batteries and inserted in Osn 1.3 remote & i got two flashes, now its behaving strangely, its stuck on blinking two flashes continuesly, blinks twice then it ...

Hi, Ok i tried to upload my openbox v8 stb device upgrade onto OSN, with the new Assign setup code 0018, it uploaded succesfully and I also twice checked by Download Button, and it showed 0018 selected,But if i press any button on the remote, the remote Ch List flashes twice, and nothing changes on ...

we'll have to try getting the button codes the really hard way

Just a silly query, isn't it possible to extract macros or button codes from the previous OSN 1.4 Remote files which you had created for me, as long as i remember it was also 1.4 version, since a do not recall it now.

Or if you want ...

Yes, he meant to take the batteries out while you're using RMIR, only put them back in again afterwards.

Kudos to Graham, This Time It Worked,but i am I am getting No Signature Found Starting with 3579

here is the pic

but you don't say that you took the batteries out
You mean to say that i have to click download without the batteries inserted in the remote? If yes then i didn't do that, I just pulled the batteries out and then re-inserted the batteries again selected the remote in the RMIR and clicked download ...

The solution is REMOVE THE BATTERIES AND MODIFY THE WIRING TO THE CONNECTOR BY CONNECTING RTS TO PIN 1 RATHER THAN PIN 2.
Graham i am still getting no remote found in my OSN Jp 1.4 Remote. I just Changed RTS From Pin2 To Pin1 In My 6 Pin Header.
Can make make out from the pic, which processor is ...

@mdavej

My recommendation to you is that you pick a couple of remotes you already have which are already supported and use those

Thanks for your advice will definitely think about it.

[Moderator Note] This RDF is now included with RMIR

You have not said WHY you need all these remotes
I didn't knew before hand that i have to give an explanation every time for creating rdf & maps if my request surpasses a couple of remotes.
I thought these rdf and maps would also help other forum members if they by chance acquire same models which ...

If this is for personal use, could you please tell me what all your other requests for RDFs have been for?

In Fact I Need all the remotes desperately, but since Rob is very very busy from Dec 2023 & don't have time for RDF's & Maps, and i have spend money on these remotes, so i thought you might ...