JP1 Remotes

I use VPT on one of my dreamboxes. I have set a shift-vol + and shift-vol - keymove under the Dream setting to operate the original dream volume control in case the dreambox volume is set too low from the web interface. This will in effect over ride the VPT setting.

sigue wrote:set VPT Device to TV, set VPT status to ON, and set AUX use VPT to YES. It works without keymove.

That is how I have it set but it does not work on AUX for some reason.

Why do you want to change the VPT with a macro?

I'm still looking for changing my VPT device.
is there any protocole to do it ?

I found that on my AUX device the punch through did not want to work. I just set a key move on AUX for the volume up down buttons to operate the TV volume up down.

I hope that helps.

This is a very useful and ...

Thanks a lot, I think I understand all that now. I have made my upgrade look like this

Upgrade Code 0 = 0C 31 (TV/1103) Uses Device Multiplexor Protocol 01FE. BOUQUET+=TV/0238, BOUQUET-=VCR/0500
FE 00 21 00 D0 11 D6
End

It works fine. I use the TV mode and mapped shift-video to select BOUQUET ...

Upgrade Code 0 = 0C 31 (TV/1103) Device Multiplex. Vol+=SAT/0031, Vol-=SAT/1238, Mute=VCR/0500
FE 00 41 20 01 24 B8 11 D6
End


That all makes sense now thank you. I suspect the FE references the 01 FE multiplex, the only bit I am not sure about is the 00 41 bit. The 00 is on both upgrades you ...

The following device upgrade for URC-39930 maps BOUQUET+=24 B8 for SAT/1238 and BOUQUET-=25 FD for SAT/1563

Upgrade Code 0 = 0C 31 (TV/1103) Uses Device Multiplexor Protocol 01FE. BOUQUET+=SAT/1238 BOUQUET-=SAT/1563
FE 00 21 24 B8 25 FD
End


Please can you explain how I can change this upgrade ...

Thankyou I will have a look at the other thread.

I have tried that already but I am not sure if I have set i up correctly. I have uploaded my file here https://www.hifi-remote.com/forums/dload ... le_id=5310 if anyone has the time to have a look it would be appreciated.

I think I am after setting up a multiplex in a Dreambox V4 remote.
I have it programmed for 3 devices. A TV and 2 Dreamboxes with different codes so I can control both individually.

I have the codes, as an upgrade, for my Kiss DP-500 DVD player. I want to be able to add the DVD as a 4th device. I ...