JP1 Remotes

Thank you SO MUCH for your help. I had tried everything to get this to work, but couldn't get it to work. I was ready to jump to some different remote tech. I tried the Harmony over Christmas, but I can't stand that "stateful" system. I discovered that I can only work with a "stateless" remote. So I ...

I've been using this remote and RM/IR for years. Trying to start all over with some new devices. I've loaded four devices into RMIR, and then uploaded to the remote, but nothing works. I've attached the rmir file that I'm trying to use. It doesn't work with any of the four devices that are loaded in ...

Perfect. Thanks so much.

In the original rmdu:

Protocol = NEC1
Protocol = 00 5A
Device is blank.
Sub Device = 191
Fixed Data = 20 FF 02

So, the BF = 191, so that's the Sub Device.
What does the last column/byte mean? the "B8" in the above example? Just ignore that when entering into RM?

Thanks so much for your help.

I found the following codes for the Dune HD remote, which appear to be a later version of the remote codes than the rmdu above:

http://dune-hd.com/firmware/rc/

I can't figure out how to get these into RM, which I'd like to do, because there are some keys coded that are not in the original rmdu ...

Thanks so much for your help. I'm using IR to add them as learned codes, which is working great.

I'm not sure how to convert this info from my new Gbox MX2 XBMC remote into something that can be used in my JP1 remote. Here is the raw remote data:

http://matricom.net/forums/#/discussion ... es-for-jp1

How do I convert that to a device rmdu file?

Thanks for your help!

After trying the version 2.0 rmdu file in post #p3 of this thread, and not being able to get it to work on my Atlas 1056, I tried the version 3.0 in post #p1 in this thread, and it works. So, if you are looking for a rmdu that works with recent Dune HDI players, use the file in post #p1 in this ...

Got it to work. From that thread, there are two different rmdu files there. I was having problems with the one in my first post above. But, downloading this one works:

https://www.hifi-remote.com/forums/dload.php?action=file&file_id=7835

This one that works is set to device 0. I am using it for ...

It has been set to device 1. Is there a way to set it to BOTH device 1 AND device 0? Or are you saying that I should just switch it to device 0 and try that? Thanks.

I've been using JP1 remotes for years. Once I found the Atlas 1056, I found the perfect remote. I've added devices over the years, now operating a Vizio TV, Pioneer receiver, AT&T Uverse DVR, Clearplay DVD, and XBox 360. Now I'm trying to add a Dune HD media player, which uses the same remote ...

I got one of Tommy's JP1.3 interfaces:

https://www.hifi-remote.com/forums/viewtopic.php?t=9405

and the problem discussed above is no longer present. Tommy's interface is in it's 3rd version since the above problems, and it now works perfectly with Vista.

My advice: DO NOT BUY the JP1.x interface ...

I got one of Tommy's JP1.3 interfaces:

https://www.hifi-remote.com/forums/viewtopic.php?t=9405

and this fixed the problem.

My advice: DO NOT BUY the JP1.x interface from DIYgadet.com if you are using it with the Atlas OCAP and Vista. I wrote DIY about this, and they didn't even try to help fix it ...

I've got the following:
URC-1056 Atlas OCAP Black Remote with backlighting (30333033)
JP1.2/1.3 serial cable from DIYgadget
PL-2303 USB to Serial adapter from DIYgadget
Dell Latitude XPS 1330 Vista notebook, with PL2303 USB to RS232 (Serial) Adapter Driver for Vista installed (from DIYgadget)

The ...

I tried 3 different sets of new batteries, and I can still only download from the remote. Upload won't work - gives me the same error.

Thanks for any advice you can offer.