991

(991) Code Search - Search for device code for your tv/etc.

Older Remotes

1. TAP the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER 9 - 9 - 1 (two blinks on the remote)
4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off.

Make sure that the remote is pointed at your device during the search, You may have to TAP this sequences of buttons up to 100 times to search the entire library of codes. The led will blink twice when there are no more codes to test.

1. When your device turns OFF, TAPD the SETUP button to lock in the code for your device.

Newer Remotes that use 5 digit setup codes

1. Turn on your device you want to program.
2. Press device button (TV,DVD,CABLE) on your remote. Then hold Setup until the led button flashes twice.
3. Enter 9-9-1 and the led will flash twice.
4. Press the digit that corresponds to the device type (ie 1 for TV) led will flash twice.
5. Press the Power button, then press CH+ multiple times until the device turns off.
6. Once the device turns off, press setup to lock the code

The led will blink twice when there are no more codes to test. Some categories have more than 200 codes to test.

Newer Remotes that use 4 digit setup codes

1. Turn on your device you want to program.
2. Press device button (TV,DVD,CABLE) on your remote. Then hold Setup until the led button flashes twice.
3. Enter 9-9-1 and the led will flash twice.
4. Press the function you want to test such as Power, then press CH+ multiple times until the device turns off.
5. Once the device turns off, press setup to lock the code

The led will blink twice when there are no more codes to test. Some categories have more than 200 codes to test.