974
From JP1 Remotes
(974) Turning On/Off Back-lighting
Some some hard-button remotes have a button that will turn on off back lighting on the fly. The button will have an icon that looks like a lightbulb. If the lightbulb is on the SET/Magic/Setup button it usually needs to be double tapped to turn on/off the backlight. On other backlit hard-button remotes, the button doesn't exist or doesn't work. In that case a 974 command might be available.
- PRESS and HOLD the SETUP button until the red LED flashes twice.
- TAP 9 - 7 - 4, the red LED will flash:
- 2 times if the back light is turned on
- 4 times if the back light is turned off.
On the OARUSB04G (and also URC-6440) the 974 does not work but the TILT function can be disabled by this method:
- PRESS and Hold Setup button until 2 blinks of TV button,
- Press Pause button. The TV button will blink:
- 2 times - capacitive hand sensor enabled
- 4 times - capacitive hand sensor disabled
