Sending an EFC code direct from remote

From JP1 Remotes Wiki
Revision as of 17:07, 28 September 2014 by The Robman (talk | contribs) (Created page with "===Sending an EFC code direct from remote=== Make sure you are in the mode for the device. #TAP and release setup button. #Enter EFC code (3-5 digits long depending on rem...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Sending an EFC code direct from remote

Make sure you are in the mode for the device.

  1. TAP and release setup button.
  2. Enter EFC code (3-5 digits long depending on remote)
  3. make sure remote is pointing to device when you enter last digit.
Note: The command is sent as long as the last digit is held..
Retrieved from "https://hifi-remote.com/wiki/index.php?title=Sending_an_EFC_code_direct_from_remote&oldid=1570"