983: Difference between revisions
From JP1 Remotes Wiki
Jump to navigationJump to search
The Robman (talk | contribs) Created page with "==(983) Remote Signature Blink Back== #TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE #PRESS and HOLD the SETUP button until the red LED flashes twice, then REL..." |
The Robman (talk | contribs) |
||
| Line 8: | Line 8: | ||
#TAP 3, carefully COUNT the number of blinks. (3rd digit) | #TAP 3, carefully COUNT the number of blinks. (3rd digit) | ||
#TAP 4, carefully COUNT the number of blinks. (4th digit) | #TAP 4, carefully COUNT the number of blinks. (4th digit) | ||
#TAP 5, carefully COUNT the number of blinks. (5th digit - JP1.4/JP2 remotes only) | |||
If the remote DOES NOT blink it means the number is 0. | If the remote DOES NOT blink it means the number is 0. | ||
This is your signature code. | This is your signature code. | ||
<br> | |||
*JP1.3 remotes will have 4 digits starting with a 3 | |||
*JP1.4 remotes will have 5 digits starting with a 3 | |||
*JP2 remotes will have 5 digits starting with a 2 | |||
<noinclude>[[Category:9xx Commands]]</noinclude> | <noinclude>[[Category:9xx Commands]]</noinclude> | ||
Revision as of 03:00, 26 May 2016
(983) Remote Signature Blink Back
- TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 8 - 3.
- TAP 1, carefully COUNT the number of blinks. (1st digit)
- TAP 2, carefully COUNT the number of blinks. (2nd digit)
- TAP 3, carefully COUNT the number of blinks. (3rd digit)
- TAP 4, carefully COUNT the number of blinks. (4th digit)
- TAP 5, carefully COUNT the number of blinks. (5th digit - JP1.4/JP2 remotes only)
If the remote DOES NOT blink it means the number is 0.
This is your signature code.
- JP1.3 remotes will have 4 digits starting with a 3
- JP1.4 remotes will have 5 digits starting with a 3
- JP2 remotes will have 5 digits starting with a 2
