983: Difference between revisions
From JP1 Remotes Wiki
Jump to navigationJump to search
The Robman (talk | contribs) |
The Robman (talk | contribs) m 5 revisions imported |
||
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
This is your signature code. | This is your signature code. | ||
<br> | <br> | ||
*JP1.2 remotes will have 4 digits starting with a | *JP1.2 remotes will have 4 digits starting with a 1 | ||
*JP1.3 remotes will have 4 digits starting with a 3 | *JP1.3 remotes will have 4 digits starting with a 3 | ||
*JP1.4 remotes will have 5 digits starting with a 3 (and JP1.4N) | *JP1.4 remotes will have 5 digits starting with a 3 (and JP1.4N) | ||
*JP2 remotes will have 5 digits starting with a 2 | *JP2 remotes will have 5 digits starting with a 2 | ||
<noinclude>[[Category:9xx Commands]]</noinclude> | <noinclude>[[Category:9xx Commands]]</noinclude> | ||
Latest revision as of 18:41, 2 November 2025
(983) Remote Signature Blink Back
- TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 8 - 3.
- TAP 1, carefully COUNT the number of blinks. (1st digit)
- TAP 2, carefully COUNT the number of blinks. (2nd digit)
- TAP 3, carefully COUNT the number of blinks. (3rd digit)
- TAP 4, carefully COUNT the number of blinks. (4th digit)
- TAP 5, carefully COUNT the number of blinks. (5th digit - JP1.4/JP1.4N/JP2 remotes only)
If the remote DOES NOT blink it means the number is 0.
This is your signature code.
- JP1.2 remotes will have 4 digits starting with a 1
- JP1.3 remotes will have 4 digits starting with a 3
- JP1.4 remotes will have 5 digits starting with a 3 (and JP1.4N)
- JP2 remotes will have 5 digits starting with a 2
