15-2107, 8-In-One Touch Screen Remote Control
Amplifiers:
Audio Cassette Device:
Audio Receiver:
Cable Converters:
CD Player:
DVD:
Home Automation:
Laser Disc:
Miscellaneous Audio:
Satellite:
Television:
Television-VCR Combo:
VCR:
Video Accessory:

Device Types
You can use the remote control's device keys to control these types of devices:
Device Key to UseDevice Type
TVTVs
VCR/DVDVCR or PVR (Personal Video Recorder)
CBL/SATCable converter or SAT/DSS receiver
RECVRDVD or LD Player
AUX1TV
AUX2VCR/DVD
AUX3CBL/SAT
AUX4TUNER/RECEIVER
Setting Up Your Remote Control
  1. Refer to Manufacturers' Codes above and write down the code(s) for the brand of each device you want to program on the supplied label.
    Note: Some manufacturers may have several codes listed. Try each until you find the right one.

  2. Turn on all your home entertainment devices.

  3. Hold down P for at least 3 seconds. CODE SET appears.
  4. Touch SELECT. The last selected mode appears.
    Note: To exit this mode at any time, hold down P again for at least 3 seconds. EXITING appears, then the last-used mode screen.

  5. Touch the desired mode key (TV, VCR/DVD, CAB/ SAT, RECVR, AUX 1, AUX 2, AUX 3, or AUX 4). The default or previously set device and code appear.

  6. If the displayed device is not the desired type, use the up or down arrows to scroll to a device you want. Then touch SELECT. The selected device and its (default or previously set) code appear.
    Note: There are 13 different devices available for setup.

  7. Using the keypad, enter the first 4-digit manufacturer's code for the desired device and then touch SELECT. If you've entered a correct code, SUCCESS appears.
    If the code is not correct, NOT FOUND appears instead. Enter the next code until SUCCESS appears.
    Note: For TV/VCR combinations, touch VCR/DVD in Step 5 and use the VCR code listed for your model above. If your TV/VCR combination also lists a TV code, you must program the TV separately by repeating Steps 5 through 7 to add volume control. In Step 5, press TV; then in Step 7, enter the TV code.

  8. Repeat Steps 5 through 7 to set up other devices.

    To exit the programming mode, hold down P for at least 3 seconds. EXITING appears. The remote control returns to the last-used mode screen.