15-1992, 4-in-One Light Up Remote Control
Cable Converters:
CD Players:
Home Automation:
Video Accessories:
Satellite Receivers:
Televisions:
VCRs:
TV/VCR Combinations:

Device Types
You can use the remote control's device keys to control these types of devices:
Device Key to UseDevice Type
TVTVs
VCRVCRs and TV/VCR combinations
CBLCable converters, satellite systems
AUXCD players, home automation


Setting Up Your Remote Control
  1. Refer to codes above to setup your 4-in-One remote.
    Note: Some manufacturers have several codes listed. Try each until you find the right one.

  2. Press the device key for the type of remote you are replacing (TV, VCR, or CBL or AUX). The red light blinks.

  3. Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code.

    For example, to replace a Panasonic TV's remote control (manufacturer's code 0051), press TV, hold down P until the red light blinks twice, then press 0 0 5 1.

    When the red light blinks twice, the remote control has accepted the code.

    Note: If the code you entered is invalid, the red light blinks.

  4. Point the remote control at your device and press POWER. Your device should turn off (or on, if it was off).

    If the remote does not operate your device, try the other codes listed above for your brand of TV, VCR, cable converter, or CD player.

  5. Repeat Steps 2-4 for additional devices.