URC's (15-1904/5/6/7/8/9/10)
(15-1911)Setup InstructionsFaxback Doc 7967

Setup Instructions for the following Universal Remote Controls:

15-1904:
15-1905:
15-1906:
Press the [DEVICE] key, then [A] [B] [C] then the 3 digit code, the UPC will flash twice when it accepts the code. Library step through is [A] [B] [DEVICE] [C] [POWER] then repeatedly press [C] and [POWER] until device responds, then press [A]. Display code by pressing [A] [DEVICE] digit #.
 
15-1907:
15-1908:
15-1910:
Has a two line digital display. Refer to OM. Press the [DEVICE] key, press and hold the [PROG] key until the LED blinks once. Continue holding the [PROG] key while entering 3 digit code, the URC will flash twice when it accepts the code. To step through library, hold down [PROG] until it blinks while pressing [POWER] then [DEVICE] repeatedly. To display code, hold [PROG] until it blinks and continue holding [PROG] and while pressing # of digit.
 
15-1909:
15-1911:
Press the [DEVICE] key, press and hold the [P] key until the LED blinks twice. Release [P] key then the enter 3 digit code, the URC will flash twice when it accepts the code. Library step through code is 991, then [POWER] then [DEVICE] repeatedly. Display code # is 990, followed by # of digit.

NOTE: If you are experiencing problems in programming your remote control it may not contain a code, then we recommended an alternatiue URC. Howeuer, the following procedure may program the remote.
  1. Turn the cable box off.
  2. Press and hold the [P] key
  3. While holding the [P] key, alternatively press [POWER] then [CABLE] until the cable box turns on. (Pressing the [POWER] key tests the current code and the [CABLE] key selects the next code).
Radio Shack URC Codes:
TV:032,039,154,165,178
VCR:000,035,037,039,046,047,048,062,066,104,240
CATV:000,022,039,153,207
CD:000,037,179,196
Receiver:440
A/B Switch:160

(EB 3/4/97)
(PM/pc-02/01/96)