15-1995, 7-in-One IR/RF Remote Control

Amplifiers:
Cable Converters:
Cassette Decks
CD Players:
Digital Audio Tape:
DVD Players:
Home Automation:
Laser Disc Players:
Miscellaneous:
Phonographs:
Satellite Receivers:
Televisions:
Tuners/Receivers:
TV/VCR Combinations:
VCRs:
Video Accessories:


Device Types
You can use the remote control's device keys to control these types of devices:
Device Key to Use Device Type
TV TVs
VCR VCR, TV/VCR Combo, Digital video disc, laser disc player, cassette deck, digital audio tape player
CBL/SAT cable converters, satellite systems, video accessories
CD CD players, phonographs
AMP miscellaneous audio devices
AUX 1 or AUX 2 miscellaneous audio devices
PLUG 'N POWER home automation
Note: To enjoy the full benefit of the Plug ’n Power feature, you must purchase additional equipment, available at your local RadioShack store.


Quick Set Up Of Your Remote Control

The following steps tell you how to quickly set up the 7-in-One to operate all of your devices.

Note: For the best operation, you should be within 15 feet of the device you want to control. Follow these steps for quick setup:

  1. Turn on all of the devices you are setting up.
  2. Press TV.
  3. Hold down P until TIMED SEQ appears.
  4. Press v (arrow down), CODE SETUP appears.
  5. Press SELECT. DEV SET UP appears.
  6. Press SELECT again. TV appears.
  7. Enter the fist four-digit TV code listed for your TV's brand in Televisions above then press SELECT.

    Note: If the 4-digit code begins with zero, only the last 3-digits will appear on the display.

  8. Point the remote at your TV and press POWER. Your TV should turn off. If it does not, enter the next code from the list and press SELECT then POWER again. When your TV turns off, press VCR. VCR appears.
  9. Enter the first four-digit VCR code listed above for your VCR's brand or TV/VCR Combinations, then press SELECT.
  10. Point the remote at your VCR and press POWER. Your VCR should turn off. If it does not, enter the next code from the list and press SELECT then POWER again. When your VCR turns off, press CBL. CABLE appears.
  11. Continue setting up devices by pressing the appropriate device key, entering your device's code and pressing SELECT. Refer to the above code lists for the type of device you want to set up.
  12. Once the 7-in-One is operating all of your devices, press ESCAPE to stop programming.



More RadioShack Remote Control Codes Can Be Found Here.