1. Refer to codes above to setup your ITZA 2000 remote.
   Note: Some manufacturers have several codes listed. Try each until you find the right one.
2. Press the device key for the type of remote you are replacing (TV, VCR, AUX or CBL). The red light blinks.
3. Hold down P until the red light blinks twice, then enter the 4-digit code in Step 1.
4. For example, to replace a Panasonic TV’s remote control (manufacturer's code 0051), press TV, hold down P until the red light blinks twice, then press 0 - 0 - 5 - 1.

   When the red light blinks twice, the code has been accepted.

   Note: If the code you entered is invalid, the red light blinks.

5. Point the remote control at your device and press POWER. Your device should turn off (or on, if it was off).
   If the remote does not operate your device, try the other codes listed above for your brand of device.
6. Repeat Steps 2–4 for additional devices.

More RadioShack Remote Control Codes Can Be Found Here.