Six-In-One Remote Control  (15-1905)    Seq. Keys      Faxback Doc. # 6662

AUDIO SEQ/VIDEO SEQ KEYS

These two keys can each perform sequences that let your 6-in-1 perform
multiple functions at the touch of a single button.  For instance, to have
the VIDEO SEQ turn on your Cable box, VCR and TV, then change to channel
23, press:

                         A - C - VIDEO SEQ - CABLE-
                         POWER - VCR - POWER, - TV-
                         POWER - 2 - 3 - A - C

Note:  Some TVs and cable converters require you to press the ENTER key
       after direct access channel selection, for example:

                         POWER - 2 - 3 - ENTER - A - C

A similar sequence can be placed on the AUDIO SEQ key.

Plug 'n Power

The Plug'n Power feature allows you to control lamps and appliances from
the 6-in-1 Remote Control.  You will need a Plug n Power controller
and Plug n'Power modules to use this feature.  The Plug 'n Power
controller can be special ordered at your local Radio Shack store from CMC
as Model 61-2658.  The Plug n'Power modules are available at your local
Radio Shack store.

After using the setup instructions provided with the Plug'n Power
controller and modules, you can use your 6-in-1 remote to operate lights
and appliances by following these instructions:

1.  Press the Plug'n Power key.

2.  Press the number of the appliance you wish to control.

3.  Press one of the buttons labeled in blue on your remote control:

         All Off     turns all appliances off.

         All Lts On  turns all lamps on at one time (will not affect other
                     appliances).

         Brt         brightens the selected lamp

         Dim         dims the selected lamp

         On          turns on lamp/appliance

         Off         turns off lamp/appliance

For example, to turn on a lamp that you have set to code 7, press:

         Plug'n Power - 7 - On

(br/all-6/11/94)