4-In-One Remote Control
(15-1991)                 Features                   Faxback Doc. # 58255

Your RadioShack 4-in-One Remote control can replace up to four infrared 
remote controls.  You can use it to control your TV, VCR, TV/VCR 
combination, cable converter, CD player and more.

Unlike some universal remote controls the 4-in-One Remote is preprogrammed
with the most commonly used commands, so it does not have to learn its
commands from the original remote controls.  All you have to do is tell it
which remote controls you want to replace (by entering 4-digit codes).

This manual includes a list of many manufacturers' 4-digit codes for your
TVs, VCRs, cable converters, CD players, and more.

Your remote control's features include:

   Powerful Infrared Beam - lets you operate your remote controlled
                            devices from a greater distance than many of
                            the original remote controls.

Large, Easy-to-Use Keypad - with buttons in the ideal positions for easy
                            operation.

    Handy Reference Label - provides a convenient place for you to write
                            down the manufactures' codes for your devices.

        Toll Free Support - brings expert help for your remote control
                            directly to you when you call 1-888-284-8735.

Note:  You need four AAA batteries (not supplied) to power your 4-in-One 
       Remote Control.

Introduction

Your RadioShack 4-in-One Remote was designed to control the most commonly 
used functions on your TV, VCR, TV/VCR combination, cable converter and CD
player.  It might not be able to duplicate some of your original remote 
control's seldom-used functions.

When you set up the remote control, its command keys work like the keys on 
your original remote controls. For example, the remote control's POWER key
works like a key on your original remote controls. For example, the remote
control's POWER key works like a key on your original remote control that
might be labeled POWER ON/OFF.

Key                        Function

P                          Used in setting up your devices.

POWER, digit keys, CH +,   Operates the same as the corresponding keys on 
CH -, VOL +, VOL-, MUTE,   your original remote control.
LAST, ENTER, TV/VIDEO

SCAN                       Automatically cycles through all of your TV, 
                           VCR, or cable converter channels.

VCR, CBL, TV, AUX          Used when you set up the remote control to
                           replace your original remote controls.  Also 
                           used during normal operation to tell the remote 
                           control which device you want to control.

REW <<, PLAY >, FFWD >>,   Controls VCR functions.
REC (o), STOP [], PAUSE ||

Note:  Whenever you use REC (o), you must press it twice.  This helps you 
       avoid accidentally recording over tapes.

(BR EB 1/10/00)