3-IN-1 Pocket Remote Control
(15-1990)                 Operation                  Faxback Doc. # 56065

1.  Press the device key for the device you want to control.

2.  Point the remote control toward the device you want to control, then
    press the desired command keys.

3.  Repeat Steps 1 and 2 for all other devices you want to control.

    Note:  The command keys on the remote control work the same as the
           keys on the original remote control; however, the labeling
           might differ slightly.

4.  To turn off the last device you selected, press POWER.  To turn off
    other devices, press the device key for the device you want to turn
    off, then press POWER.

Punch-Through

The punch-through feature lets you alternately control different devices 
without pressing the device keys for each one.

A TV is often the only device that uses the volume keys.  Punch-through 
allows you to control the TV's volume while the 3-in-One is in any device 
mode.  With punch-through on, if you press VCR and use your volume keys, 
the 3-in-One will control the TV's volume instead of the VCR's volume.

Turning Punch-Through OFF/ON

If your cable converter or VCR has a volume control, you might want to 
turn off punch-through so you can use the cable converter or VCR's volume 
control to adjust the sound.  To turn off punch-through, hold down P until 
the red light blinks twice, then press MUTE, MUTE, and CH -. The red light
blinks four times.

Now, when you want to control the volume through your cable converter, 
press CBL before using the volume controls.  If you want to control the 
volume through your VCR, press VCR before using the volume controls.

To turn punch-through back on, hold down P until the red light blinks 
twice, then press MUTE, MUTE, and CH -.  The red light blinks twice.

(EB 7/26/99)
(EB - Rev. 1/11/00)