3-IN-1 Pocket Remote Control
(15-1990)                 Features                   Faxback Doc. # 56063

Your RadioShack 3-In-One Pocket Remote Control can replace up to three 
infrared remote controls.  You can use it to control your TV, VCR, TV/VCR 
combination, and cable converter.

Unlike some universal remote controls, the 3-in-One is preprogrammed with 
the most commonly used commands and does not have to learn its commands 
from the original remote controls.  All you have to do is tell it which 
TV, VCR, TV/VCR combination, or cable converter's remote controls you want 
to replace (by entering 4-digit codes).

This manual includes a list of many manufacturer's 4-digit codes for TVs, 
VCRs, and cable converters.

Your remote control's features include:

  Powerful Infrared Beam - so you can operate your remote-controlled
                           devices from a greater distance than with many
                           of the original remote controls.

   Handy Reference Label - provides a convenient place for you to write
                           down the manufacturers' codes for your devices.

Convenient Keypad Design - each key is positioned for easy operation.

       Toll Free Support - you can get expert help for your remote control
                           by calling 1-888-284-8735.

Note:  You need two AAA batteries (not supplied) to power your 3-in-One
       Pocket Remote Control.

Introduction

Your RadioShack 3-in-One Pocket Remote Control was designed to control the 
most commonly used functions on your TV, VCR, TV/VCR combination, and 
cable converter.

When you set up the remote control, its command keys work like the keys on 
your original remote controls.  For example, the remote control's POWER 
key works like a key on your original remote control which might be 
labeled POWER ON/OFF.

KEY                    FUNCTION

P                      Used in setting up your devices.

POWER, CH+, CH-,       Operate the same as the corresponding keys on your
VOL +, VOL -, MUTE     original remote control.


CBL, VCR, TV           Used when you set up the remote control to replace
                       Your original remote controls.  Also used during
                       Normal operation to tell the remote control which
                       device you want to control.

REW <<, STOP [],       Controls VCR functions.
FFWD >>, REC (o), 
PLAY >, PAUSE ||

Notes:  Whenever you use REC (o) on the remote control, you must press it
        twice.  This safety feature helps you avoid accidentally recording
        over tapes.

        The remote control might not be able to duplicate some of your
        original remote control's seldom-used functions.

(EB 7/26/99)
(EB - Rev. 1/11/00)