3-in-One Easy Remote Control
(15-1931)                 Features                   Faxback Doc. # 48701

Your RadioShack 3-in-One Easy Remote Control can replace up to three
infrared remote controls.  You can use it to control your TV, VCR, or
cable converter.  Unlike some universal remote controls, your remote
control is preprogrammed with the most commonly used commands and does not
have to learn its commands from the original remote controls.  All you
have to do is tell it which TV, VCR or cable converter's remote controls
you want to replace (by entering 3-digit codes).

This manual includes a list of many manufacturers' 3-digit codes for TVs,
VCRs, and cable converters.

Your remote control's features include:

  Powerful Infrared Beam - so you can operate your remote-controlled
                           devices from a greater distance than with many
                           of the original remote controls.

   Glow-in-the-Dark Keys - some of the remote control's keys glow so you
                           can see them even in a dimly lit room.

   Handy Reference Label - provides a convenient place for you to write
                           down the manufacturers' codes for your devices.

Convenient Keypad Design - each key is positioned for easy operation.

       Toll Free Support - you can get expert help for your remote control
                           by calling 1-888-533-7135.

Note:  You need four AAA batteries (not supplied) to power your 3-in-One
       Easy Remote Control.

How The 3-in-One Works

Your RadioShack 3-in-One Easy Remote Control was designed to control the
most commonly used functions on your TV, VCR, and cable converter.

When you set up the remote control, its command keys work like the keys on
your original remote controls.  For example, the remote control's PWR key
works like a key on your original remote control which might be labeled
POWER ON/OFF.

Key                  Function

P                    Used in setting up your devices.

PWR, digit keys,     Operate the same as the corresponding keys on your
CH/\, CH\/, VOL/\,   original remote control.
VOL\/, M, LAST

VCR, CBL. TV         Used when you set up the remote control to replace
                     your original remote controls.  Also used during
                     normal operation to tell the remote control which
                     device you want to control.

SCAN                 Used to scan through a list of favorite channels.

REC (), PLAY >,      Control VCR functions and are used to select options
PAUSE ||, < REW,     and navigate in your TV or cable converter.
 [] STOP, > FF

Notes:  Whenever you use REC () on the remote control, you must press it
        twice.  This safety feature helps you avoid accidentally recording
        over tapes.

        The remote control might not be able to duplicate some of your
        original remote control's seldom-used functions.

(EB 7/8/98)