3-in-One Pocket Remote Control (15-1930) Operation Faxback Doc. # 48424 1. Press the device key for the device you want to control, then point the remote control at the device and press [PWR] to turn the device on. 2. Repeat Step 1 for all other devices you want to operate. 3. Point the remote control toward the device you want to control, then press the appropriate device key and the desired command keys. Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly. 4. To turn off the last device you selected, press [PWR]. To turn off other devices, press the device key for the device you want to turn off, then press [PWR]. PUNCH-THROUGH The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. Here's how it works. Not all of the remote control's keys are used by every device. For example, a TV is often the only device that uses the volume keys. After you press [TV], then press [VCR], you can still use the volume control to control the TV. Note: The punch-through feature might not work if the last two devices you selected have the same (or similar) features. Foe example, most TVs and some cable converters have channel select keys on their remote controls. Turning Punch-Through Off/On If your cable box or VCR has a volume control, you might want to turn off punch-through so you can use the cable box's or VCR's volume control to control the sound. To turn off punch-through, hold down [P] until the red light blinks twice, then press [CH \/], [CH \/], and [VOL \/]. If you want to control the volume through your cable box, press [CBL] before using the volume control. If you want to control the volume through your VCR, press [VCR] before using the volume control. To turn punch-through back on, hold down P until the red light blinks twice, then press CH \/, CH \/, and VOL \/. (EB/tc 6/26/98)