3-in-One Pocket Remote Control
(15-1930)                 Features                   Faxback Doc. # 48422

Your RadioShack 3-in-One Pocket Remote Control can replace up to three
infrared remote controls.  You can use it to control your TV, VCR, or
cable converter.  Unlike some universal remote controls, your remote
control is preprogrammed with the most commonly used commands and does not
have to learn its commands from the original remote controls.  All you
have to do is tell it which TV, VCR or cable converter's remote controls
you want to replace(by entering 4-digit codes).

This manual includes a list of many manufacturer's 4-digit codes for TV's,
VCR's and cable converters.

Your remote control's features include:

  Powerful Infrared Beam - so you can operate your remote-controlled
                           devices from a greater distance than with many
                           of the original remote controls.

   Glow-in-the-Dark Keys - some of the remote control's keys glow so you
                           can see them even in a dimly lit room.

   Handy Reference Label - provides a convenient place for you to write
                           down the manufacturers' codes for your devices.

Convenient Keypad Design - each key is positioned for easy operation.

       Toll Free Support - you can get expert help for your remote control
                           by calling 1-888-533-7135.

Note:  You need two AAA batteries (not supplied) to power your 3-in-One
       Pocket Remote Control.

HOW THE 3-IN-ONE WORKS

Your RadioShack 3-in-One Pocket Remote Control was designed to control 
the most commonly used functions on your TV, VCR, and cable converter.

When you set up the remote control, its command keys work like the keys 
on your original remote controls.  For example, the remote control's [PWR]
key works like a key on your original remote control which might be 
labeled [POWER ON/OFF].

Key                      Function

[P]                      Used in setting up your devices.

[PWR], [CH/\], [CH\/],   Operate the same as the corresponding keys 
[VOL/\], [VOL\/], [M]    on your  original remote control.

[VCR], [CBL], [TV]       Used when you set up the remote control to
                         replace your original remote controls.  Also
                         used during normal operation to tell the remote
                         control which device you want to control.

[REC o], [PLAY >],       Control VCR functions and are used to select
[PAUSE ||], [< REW],     options and navigate in your TV or cable
[STOP []], [> FF]        converter.

Notes:  Whenever you use [REC o] on the remote control, you must press it
        twice.  This safety feature helps you avoid accidentally recording
        over tapes.

        The remote control might not be able to duplicate some of your
        original remote control's seldom-used functions.

(EB/tc 6/26/98)