Pocket Remote Control
(15-1915B)                Operation                  Faxback Doc. # 47660

1.  Press the device key for the device you want to control.

2.  Point the Pocket Remote at the device and press PWR to turn it on.

3.  Point the Pocket Remote at the device and press the desired command
    keys.

    The command keys on the Pocket Remote work the same as the keys on the
    device's original remote control; however the labeling might differ
    slightly.

4.  Repeat Steps 1-3 for other devices.

5.  To turn off the last device you selected press PWR.  To turn off other
    devices, press the device key for the device you want to turn off then
    press PWR.

PUNCH-THROUGH

The punch-through feature lets you control two different devices without
pressing the device keys for each one first.  Here's how it works.

No device uses all of the Pocket Remote's keys.  For example, a TV is
often the only device that uses the VOL keys, and a VCR is usually the
only device that uses keys such as REWIND, FAST-F, and so on.

When you press TV then press VCR, any keys not used by the VCR can still
control the TV.

If your cable box or VCR has a volume control, you can turn off the punch
through feature so you can use the cable box's or VCR's volume control to
control the sound.  Hold down P until the red light blinks twice, then
enter 4 4 2.

    P CHAN \/ CHAN \/ VOL \/

If you want to control the volume through your cable box, press CBL before
using the volume control.  If you want to control the volume through your
VCR, press VCR before using the volume control.

To turn the punch-through feature back on, hold down P until the red light
blinks twice, enter 442, then press TV.

The punch-through feature does not work if the last two devices you select
have the same (or similar) features.  For example, most TVs and VCR's have
CHANNEL keys on their remote controls.  In this case, you would have to
press the desired device key before you use the Pocket Remote's CHAN \/ or
/\ keys.

(BR/eb 5/15/97)