6 in 1 IR/RF Remote Control
(15-1925) Features Faxback Doc. # 45643
Your RadioShack 6 in 1 IR/RF Remote Control comes with an RF command con-
sole that allows you to send commands to most IR (infrared)-controlled
devices from any room in your home, up to 100 feet away. You can use it to control your TV, VCR, cable box, and even lights and appliances with Plug
'n Power modules (not supplied).
The 6 in 1 IR/RF Remote Control is preprogrammed. All you have to do is
tell it which TV, VCR, or other component's remote controls you want to replace (by entering 3-digit codes), and it is automatically ready to operate most of the same functions as the original remotes.
This manual includes a list of 3-digit manufacturer's codes for TV's, VCRs, cable converters, compact disc players, satellites, and other popular remote-controlled devices.
The 6 in 1 IR/RF Remote Control's features include:
IR (Infrared) and RF - use the remote control with the system's RF
(Radio-Frequency) Commands command console to control your IR remote-
controlled devices from up to 100 feet away,
even through walls.
Reassignable Device Keys - so you can control more than one of the same
type of device (two VCRs, for example).
Fast Search - when you control more than one of the same
type of device, lets you quickly search all
programmed manufacturer's codes for that type
of device until you find the code for the
specific device you want to use.
Channel Scan - lets you scan through all the available chan-
nels on your TV, VCR, or cable box, stopping
at each one for about 3 seconds.
Favorite Channel Scan - lets you set up the remote to scan through a
list of up to 10 channels you select.
Programmable Sequence - let you press a single key to send a set of
Command commands.
Lighted Keypad - lets you use the 6 in 1 even in a dark or
dimly lit room.
Plug 'n Power Functions - allow you to operate your Plug 'n Power mod-
ules with your remote and an optional IR
controller (RadioShack Unlimited No.
10037703).
Powerful Infrared Beam - uses UHF radio Frequencies to go through
walls, so you can operate your remote-control-
led devices from a greater distance than many
original remote controls - up to 100 feet!
Convenient Keypad Design - each key is in the perfect position for easy
operation.
Handy Reference Label - provides a convenient place for you to write
down the manufacturers' codes for your remote-
controlled devices.
Toll Free Support and - you can get expert help for your 6 in 1 IR/RF
Telephone Programming Remote Control by calling 1-800-950-7044. You
can even have the manufacturer's codes for
your remote-controlled devices programmed into
your remote control by phoned!
Note: You need a four AAA batteries (not supplied) to power your 6 in 1
IR/RF Remote Control.
FCC Cautions
This equipment generates and uses radio frequency energy, and if not
installed and used properly, that is, in strict accordance with the manu-
facturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for remote control devices in accordance with the specifications in sub-part B and C of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or tele- vision reception, which can be determined by unplugging the equipment, try to correct the interference by one or more of the following measures.
Reorient the antenna of the radio/TV experiencing interference.
Relocate the RF command console with respect to the radio/TV.
Move the RF command console away from the radio/TV.
Plug the RF command console into an outlet on a different electronic
circuit from the radio/TV experiencing the interference.
Contact your local RadioShack store if the problem continues.
(LB/SM 12/03/97)