3-IN-1 Easy Remote Control
(15-1916B)                Operation                  Faxback Doc. # 44689

1.  Press the device key for the device you want to control.

2.  Point the 3 in 1 toward the device and press PWR to turn it on.

3.  Repeat Steps 1 and 2 for other devices.

4.  Point the 3 in 1 toward the device you want to control and press the
    appropriate device key, then the desired command keys.

    The command keys on the 3 in 1 work the same as the keys on the device's
    original remote control; however, the labeling might differ slightly.

5.  To turn off the last device you selected, press PWR.  To turn off other
    devices, press the device key for the device you want to turn off and
    then press PWR.

Punch Through

The punch-through feature lets you control two different devices without
pressing the device keys for each one first.  Here's how it works.

No device uses all of the 3 in 1's keys.  For example, a TV is often the
only device that uses the VOL keys, and a VCR is usually the only device
that uses keys such as REWIND, FAST F, and RECORD.

When you press TV to control a TV, then press VCR to control a VCR, any
keys not used by the VCR will still control the TV.  For example, VOL
still controls the TV's volume.

If your cable box or VCR has a volume control, you can turn off the punch-
through feature so you can use the cable box's or VCR's volume control to
control the sound (If it can already do so).

If you want to turn off the punch-through feature and control the volume
through your cable box, hold down P until the red indicator blinks twice.
Release P, then press 9 9 3 CBL.  When the indicator blinks twice, you can
control the volume through your cable box.

If you want to turn the punch-through feature back on and control the
volume through your TV, hold down P until the red indicator blinks twice.
Release P, then press 9 8 0.  When the indicator blinks twice, you can
control the volume using your TV.

The punch-through feature does not work if the last two devices you select
have the same (or similar) features.  For example, most TVs and VCRs have
channel keys on their remote controls.  In this case, you would have to
press the desired device key before you use the 3 in 1's channel keys.

Favorite Channel Scan

Your 3 in 1 is equipped with a favorite channel scan (S) key.  You can set
up the remote to repeatedly scan through up to 10 of your favorite channels
on your TV, VCR, or cable box anytime you press S.

NOTE:  The favorite channel scan key can only be set up for one device
       (TV, VCR or CBL) at a time.  You cannot set up a favorite channel
       list for another device until you clear the existing list.

1.  Press the device key (TV, VCR, or CBL) for the device with the channels
    you want to program.

2.  Hold down P until the 3 in 1's red light blinks twice.

3.  Press 9 9 6.

4.  Enter the channel number of the first channel you want to include in
    your favorite channel list.  Then press P.

    NOTES: You must press 0 before entering a single-digit channel number.

           If you are entering a channel that is three digits long, such as
           103, you do not need to press P after entering the channel
           number.

5.  Repeat Step 3 for other channels (up to 10) you want to include in your
    list.  Then hold down P until the 3 in 1's red light blinks twice.

6.  To scan through your favorite channel list, press the device key (TV,
    VCR or CBL) for the device with the channels in your list, then press
    S.  Your 3 in 1 repeatedly scans through your favorite channel list,
    stopping at each channel for 3 seconds.

7.  To stop at one of your favorite channels while the 3 in 1 is running
    through your list, press any key on the remote (other than S).

Clearing Favorite Channel Scan

If you want to change your favorite channel list, you must clear your old
list first.

1.  Hold down P until the 3 in 1's red light blinks twice, then release P.

2.  Press 9 9 6 then hold down P until the 3 in 1's red light blinks twice.


(br/EB 10/13/97)