3-IN-1 Easy Remote Control
(15-1916B)                Features                   Faxback Doc. # 44687

Intorduciton

Your Radio Shack 3 in 1 Easy Remote can replace up to three standard infra-
red remote controls.

Unlike some universal remote controls, the 3 in 1 is preprogrammed and does
not have to learn its commands from the original remote controls.  All you
have to do is tell the 3 in 1 which remote controls you want it to replace.

After you've entered the manufacturer's codes for your original remotes,
the 3 in 1 is automatically ready to operate most of the same functions as
the original remotes.  (This manual includes a list of manufacturers' codes
for TVs, VCRs, and cable converters.)

Your 3 in 1 remote has these features:

                 Replaces Other Remotes - lets you replace up to three
                                          remote controls with one
                                          easy-to-use remote control.

                 Powerful Infrared Beam - in many cases, lets you operate
                                          your remote-controlled devices
                                          from a greater distance than
                                          with the original remote
                                          controls.

               Convenient Keypad Design - places each control key in the
                                          best position for easy operation.

                  Handy Reference Label - provides a convenient place for
                                          you to write down the manufac-
                                          turers' codes.

                      Toll Free Support - you can get expert help for your
                                          3 in 1 by calling 1-800-955-2599.

NOTE:  You need two AAA batteries (not supplied) to operate your 3 in 1
       remote.

How The 3 IN 1 Works

Before you begin to use the 3 in 1, it is helpful to understand a little
about how it works - nothing technical, only an idea of what you can expect
from it.

After you set up the 3 in 1, its command keys work like the keys on your
original remote controls, though the labeling might differ slightly.  For
example, a key on your original remote control that might be labeled PWR
ON/OFF is equivalent to the 3 in 1's PWR key.

NOTES:  P is a special key that you use when you set up (program) the
        3 in 1 to replace your original remote controls.

        TV, VCR and CBL are device keys. You use them when you set up the
        3 in 1 to replace your original remote controls.  You also use the
        device keys during normal operation to tell the 3 in 1 which device
        you want to control.

        PWR (power), MUTE, and LAST (recall) operate the same as on your
        original remote control.

        Whenever you use the 3 in 1's RECORD key, you must press it twice.
        This safety feature helps prevent you from accidentally erasing
        video tapes.


(br/EB 10/13/97)