One For All - The Finder Remote Control
(15-1940)                 Operation                  Faxback Doc. # 38544

How the Finder Works

It's simple!  After you have affixed both the Transmitter and the Receiver,
you are ready to go. After you press the button on the Transmitter, the red
light will come on telling you that the signal is being sent. The light will
stay on until the Receiver is done beeping.  The beeping lasts for about 5
seconds. If you need to hear the Receiver again, just press the Transmitter
after the light goes out and you will get another 5 seconds of beeping.

Operating Instructions

1.  Attach Transmitter to TV, VCR or base of cordless phone with Velcro.

2.  Attach Receiver with Velcro to object most likely to be misplaced with
    small hole on Receiver facing out.  (Hole is speaker so beeping sound
    can be heard.)

3.  Press button on the Transmitter - the red light appears indicating that
    signal is being sent.

4.  If you need to hear the Receiver again, press Transmitter after red
    light has gone out - beeping sound will resume.


(EB 3/24/97)