MENU

How to Program your One For All® remote

(Models URC-2086 URC-7086)


Set Up

After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.

Your remote will set up in one of the following ways.

Set up #1

  1. Press the device you want to program, then release.
  2. Press A, then B, then C.
  3. Enter your 3 digit code.
  4. You should receive 2 quick flashes after entering your code.
If your remote sets up like above, press here for more instructions.

Set up #2

  1. Press the key for the device(i.e.TV,VCR,etc.) you want to program.
  2. Press and hold the "A" button. You will see two blinks. continue to hold the "A" button.
  3. While holding the "A" button, Press the three digit set up code.
    You will see two blinks on the remote.
  4. Release the "A" button.
If your remote sets up like above, press here for more instructions.

Set up #3

  1. Press the key for the device(i.e.TV,VCR,etc.) you want to program.
  2. Press and hold the "A" button- you will see a blink ad then two quick blinks on the remote.
    Release the "A" button..
  3. press the 3 digit set up code
    You will see two blinks on the remote.
If your remote sets up like above, press here for more instructions.

menu


All Material Copyright Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc.
Any questions about the products should be directed to help@ueic.com