Clearing Out A Device Button • Punch Through • Advanced Codes
How to Program your One For All® remote
Three Color LED
The three color LED will flash green, red, or yellow during operation of the remote.
It flashes green when it sends a command. It also flashes green to confirm when a new device is locked in.
It flashes red during set up
It flashes yellow when the remote cannot find your device.
Reading The Blink Code
Then press 1 and count the blinks on the remote (1st digit),
Press 2 and count the blinks (2nd digit).
Press 3 and count the blinks (3rd digit).
NO BLINKS = 0
These three numbers make up your setup code.
Redefining A Device Button
The remote allows the user to assign a TV to the VCR or CABLE button.
You can assign any combination of devices to different buttons.
Press A or "Magic"- B - C - 9 - 9 - 9 - DEVICE 1 - DEVICE 2
DEVICE 1 - A or "Magic"- B - C - SET UP CODE
Example: Let's change the Cable button to a TV button.
A or "Magic"- B - C - 9 - 9 - 9 - CABLE - TV
We can then assign a TV to the Cable button.
CABLE - A or "Magic"- B - C - 017
Clearing Out A Device Button
Press A or "Magic"- B - C - 9 - 9 - 9 - DEVICE KEY - DEVICE KEY.
Example: A or "Magic" - B - C - 9 - 9 - 9 - TV - TV
one. For instance- if your are using a VCR with out volume- you can get the TV volume without
changing devices keys. Use this procedure to Punch Through a function:
All Material Copyright ® Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc.
Any questions about the products should be directed to firstname.lastname@example.org