View previous topic :: View next topic |
Author |
Message |
clara1994
Joined: 13 Mar 2008 Posts: 28
|
Posted: Sun Mar 23, 2008 7:22 am Post subject: Learned Code OK - BUT sometimes not as reliable as original |
|
|
I have learned all codes from my original remote successfully and all of them also work quite well. The learned signal is OK and I have verified the correctness of the codes several times by relearning BUT
sometimes - about 1 in 10 key presses or so - the first key press does not work - I have to press again for the signal to come accross. With the original remote that does not happen.
Also in general the URC is slower than the original remote.
Is there a way to improve the way the URC 7555 works? Some kind of fine tuning or so?
Many thanks |
|
Back to top |
|
|
kokalarobia
Joined: 25 Apr 2008 Posts: 32
|
Posted: Fri May 23, 2008 3:56 am Post subject: |
|
|
Hello,
I think IR learning operation does emittted IR sampling ; shape accuracy depends on sampling frequency, on distance between 2 remotes, on angles, on batteries charges, ... Then happens Analogic to Digital transformation trough sensor.
It is quite impossible to re-built the same signal shape.
So solution is to do one more sampling under other circumstances. It is not sure you will have a better result. |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
Posted: Fri May 23, 2008 6:32 am Post subject: |
|
|
Have you tried creating a device upgrade instead of using the learned signals? Since you posted in the JP1 - Beginners forum I assume that you have a cable and can download from your remote to decode and inspect the learned signals in order to do that.
A brief tutorual on how to create a device upgrade is available here. There's also a version for KM users here. _________________ -- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST) |
|
Back to top |
|
|
Zellarman
Joined: 11 Oct 2006 Posts: 56 Location: Long Island, NY |
Posted: Fri May 30, 2008 11:15 pm Post subject: |
|
|
GFB has it pegged. Download the learned signals, create your own upgrade using the information learned and then upload the new upgrade. I had a very similiar situation, and these steps worked beautifuly |
|
Back to top |
|
|
kokalarobia
Joined: 25 Apr 2008 Posts: 32
|
Posted: Sat May 31, 2008 1:55 am Post subject: |
|
|
Hello, Did you put the 2 remotes close enough one to other, far enough, right enough ? Did you have new batteries ? May be you would better retry. Sometimes IR.exe does not show necessary informations (OBC, protocol). Sometimes ago I could not abandon raw learned code, so I could not put all original functions in URC, because learned code space is already out of space. Maybe professional sampling material is necessary. |
|
Back to top |
|
|
|