JP1 Remotes

clara1994 · Joined: 13 Mar 2008 Posts: 28

I have started with JP1 today - its fantastic - real easy to setup

I used IR 7.09 with remote master 1.83 for my new URC-7555

First I learned all the codes and entered them into RM. Then I copied the data to the Devices in IR and assigned the new code to VCR.
When I upload the learned codes to the remote everything is OK.

BUT
I cant upload the device upgrade. The remote just does not react with any VCR button.

What am I doing wrong?

just at the very end it does not work - this is frustrating

By the way, why cant I upload with RMIR? In the menu its grey while the Download is black. Also the KeyMoves are gone in IMIR - while in IR they are OK.

What should I use IR or RMIR to upload to the remote`?

Thank you so much for help.....

kupakai · Joined: 29 Sep 2006 Posts: 283 Location: New York

It will be much easier to figure out what's wrong if you upload your IR file and the upgrade file from RM to the Diagnosis Area and then post the link to your file so that people can find it easily.

BTW, welcome and hopefully the frustration will go away soon and you'll be amazed at what can be done with these remotes. Very Happy

Evan_s · Joined: 24 Mar 2007 Posts: 313

RMIR is really still in beta and wouldn't be recommended for some one just starting out.

As for the other questions it's best to upload your IR download with the learns in it and the RM file you created to the files section and link to it so we can look at the files. You probably missed something simple but there are literally dozens of things it could be.

clara1994 · Joined: 13 Mar 2008 Posts: 28

I have now uploaded the files to the diagnostic are.

The Names are Clara upgraded and clara RM.

Here are the links
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5457
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5456

many thanks for your help

I hope its only something small that I have done wrong....[/url]

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

Post the learned ir file as well, please.

clara1994 · Joined: 13 Mar 2008 Posts: 28

And here is my learned file wirh all the codes
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5458

vickyg2003 · Posted: Thu Mar 13, 2008 9:18 pm Post subject:

Hi Clara, you filled out your RM sheet incorrectly.

For some reason you used Device 0, Subdevice 0, parameter 20, or at least that's what my RM says. You need to set Device to 80, delete the subdevice and parmeter that you put into the file.

One thing to keep in mind, A blank is not the same as a zero.

Good Luck

kupakai · Joined: 29 Sep 2006 Posts: 283 Location: New York

The learned signals say they are NEC1 device 80 and in the upgrade file, it is set to 0.0. Try changing the device to 80, leave the subdevice and parm blank.

clara1994 · Joined: 13 Mar 2008 Posts: 28

Many thanks - that's it - now everything works well.

By the way - why are certain buttons "Key moves"?
Is it defined by the remote?

What does that mean if they are key moves - except that I have to assign one DEVICE button?

I guess I did not really understand the sense behind "key moves"

But again - many many thanks -

I finished the cable only today and would have never thought that programming is so easy...

kupakai · Joined: 29 Sep 2006 Posts: 283 Location: New York

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

Changing your device type to Cable in RM will result in no keymoves in this case. After making this change and pasting in the device, you can delete the existing key moves.

clara1994 · Joined: 13 Mar 2008 Posts: 28

OK, I understand now.

I changed the device type to cable as you said,

Thanks a lot