JP1 Remotes

Posted: **Wed Mar 12, 2008 12:57 am**

I have a SoleusAir FS1-40R-41 fan remote for which DecodeIR 2.19 only reports the raw signal information.

The frequency for every button is 37914, and the following is what is reported when each of the following keys is being held:

On/Speed button:

+1266 -428 +1266 -428 +422 -1272 +1266 -428 +1266 -428 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +1266 -428 +422 -8050

Timer button:

+1266 -428 +1266 -428 +422 -1272 +1266 -428 +1266 -428 +422 -1272 +422 -1272 +422 -1272 +1266 -428 +422 -1272 +422 -1272 +422 -8050

Off button:

+1266 -428 +1266 -428 +422 -1272 +1266 -428 +1266 -428 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +1266 -7206

Swing button:

+1266 -428 +1266 -428 +422 -1272 +1266 -428 +1266 -428 +422 -1272 +422 -1272 +1266 -428 +422 -1272 +422 -1272 +422 -1272 +422 -8050

Mode button:

+1266 -428 +1266 -428 +422 -1272 +1266 -428 +1266 -428 +422 -1272 +422 -1272 +422 -1272 +422 -1272 +1266 -428 +422 -1272 +422 -8050

Any suggestions for how I can go about turning this in to an upgrade?

Posted: **Wed Mar 12, 2008 10:46 am**

We don't need the raw timing data, we need the IR file.

Posted: **Wed Mar 12, 2008 11:14 am**

The Robman wrote:We don't need the raw timing data, we need the IR file.

Here it is:

https://www.hifi-remote.com/forums/dload ... le_id=5451

Thanks for your help.

Posted: **Thu Mar 13, 2008 10:28 am**

These signals match the Lasko signals here.

On/Speed = D8 08
Timer = D8 20
Off = D8 00
Swing = D8 40
Mode = D8 10

Posted: **Thu Mar 13, 2008 11:13 am**

That worked great. Thanks!