View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Tue Apr 06, 2004 10:23 pm Post subject: General Instruments 4DTV & VOOM - beta testers needed |
|
|
I have just written a brand new version of the hacked 4DTV protocol that is much cleaner and smaller than the last version, so I'd like someone with a 4DTV unit to give it a whirl. here's the file
I've checked the output and it appears to be correct, but you can never be certain until someone runs it by the gear itself!
The temporary KM file I created is just for unit code 0. When it gets added to KM and RM you will be able to specify the unit code again. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Wed Apr 07, 2004 8:59 am; edited 1 time in total |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Tue Apr 06, 2004 11:03 pm Post subject: |
|
|
BTW, this protocol is also used in the STB's for the new VOOM all high defintion satellite service that started recently. _________________ -Jon |
|
Back to top |
|
|
DocMCSE
Joined: 23 Sep 2003 Posts: 15
|
Posted: Wed Apr 07, 2004 4:05 pm Post subject: |
|
|
Rob, et.al...,
I have downloaded and tested your beta 4dtv protocol on a ReplayTV 5000 remote and a OFA 8910 remote and it works great. Saved 15 bytes in the ReplayTV's memory and over 30 bytes in the 8910 since I replaced the older "hacked" 4dtv protocol from both remotes. All functions I have tried worked just as expected, and I hope to get a chance later to try out the other buttons (lesser used functions). _________________ Simply one man's opinion! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed Apr 07, 2004 4:21 pm Post subject: |
|
|
Thanks Doc. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mikewv100
Joined: 13 Feb 2004 Posts: 21
|
Posted: Wed May 12, 2004 9:24 pm Post subject: Voom Upgrade code |
|
|
I just got Voom. The Upgrade code works perfectly. Thanks |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Thu May 13, 2004 9:40 am Post subject: |
|
|
Mike,
How do you like VOOM?
Would you like to search for hidden commmands?
there are only 63 total commands in this protocol. Here are the ones (OBC's) that aren't in Rob's upgrade:
0
3
8
12
13
19
26
33
37
38
40 through 63
I'm thinking that since this is a HD box that it may have discrete commands such as aspect (4:3, 16:9), Output resolution (720p, 1080i) and perhaps RD and HD modes. It might even have power On and Off although that is the least important, IMO.
You can just add those OBC's to the bottom of Rob's upgrade in the Functions tab, select those commands in the Buttons Tab and create a new device upgrade that you temporarily add to test.
There is always a risk when testing unknown commands that you get into some setup mode or reset your settings. I do know people have tested all 64 commmands on the 4DTV boxes with no reported problems. _________________ -Jon |
|
Back to top |
|
|
mikewv100
Joined: 13 Feb 2004 Posts: 21
|
Posted: Sun May 30, 2004 8:45 pm Post subject: Voom |
|
|
I find the upgrade code perfect I have one question. When using voom remote there is a green button that moves thru the HD channels only. I don't see that code mapped to any button. How can I find out what the efc is, or should I just learn it and be done?
Mike |
|
Back to top |
|
|
mikewv100
Joined: 13 Feb 2004 Posts: 21
|
Posted: Sun May 30, 2004 8:48 pm Post subject: to Jon |
|
|
I posted before I read your post I will do that now and report my findings thanks for figuring out what I needed before I did!! |
|
Back to top |
|
|
bigbge
Joined: 22 Dec 2003 Posts: 35
|
Posted: Fri Jun 04, 2004 12:04 pm Post subject: Problems with VOOM upgradw |
|
|
I posted this also in another forum, Code Search, probably belongs here.
I just got VOOM. I have the OFA 8910. I installed the upgrade code posted by robman for 4dtv using kemap-master and IR. I have done this before so I know the process. The upgrade (device 1362) does not work at all. When I push any button I notice the red led on the remote emits a very brief/dim flash. I suspect something is not right with the protocol. Yes I installed both the Device and protocol upgrades.
I called OFA support. They said there was a code, 0869, for VOOM. It is already in my remote. Did some quick testing and it works so far.
Need help. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jun 04, 2004 1:03 pm Post subject: |
|
|
Are you sure that you had the URC-8910 selected in KM. The symptoms you describe make it sound like you had an older remote selected, such as the 15-1994, etc _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bigbge
Joined: 22 Dec 2003 Posts: 35
|
Posted: Sat Jun 05, 2004 1:13 am Post subject: |
|
|
You are right. I forgot the last remote selected is not remembered. Thanks for the great troubleshooting. |
|
Back to top |
|
|
glikness
Joined: 17 May 2005 Posts: 7 Location: minnesota |
Posted: Thu Feb 07, 2008 1:57 pm Post subject: voom code update |
|
|
just finished modification on the voom code and have it working with ALL keys.Uploaded to file section. _________________ uei remotes:
2-urc-8810,rs 1994,urc-6800,parrarel programing cable
sat-sony srv2000,direct hr10-250,dish 301,300,510,508,voom 550,hughes hird e-8,Samsung SIR-TS360
tv-ge
reciever-pioneer
ota-usdtv
dvd-pioneer dv503 |
|
Back to top |
|
|
|