JP1 Remotes

schmidlapp · Joined: 16 Oct 2003 Posts: 12 Location: Western NY

I am not new to this because I have been sucessfully using IR and KM/RM to program my remote for 4 years. But recently I got a new TV so I decided to download the latest and greatest IR and RM programs and start from scratch. The problem is when I load up IR and check the interface a box comes up and says "Failed to open JP1.x interface." The RDF's are recoginized but it won't allow me to download my current codes from my remote which is where I want to start my upgrade. The IR program worked fine the other day before I decided to try the newest version. Any help would be greatly appreciated.

vickyg2003 · Posted: Fri Jan 11, 2008 7:46 pm Post subject:

Are you really trying to do a JP1.x? That's a realatively new type of support. If you have been doing this a long time, chances are you want to select JP1.

In IR Select interface off the menu and select the appropriate cable.

schmidlapp · Joined: 16 Oct 2003 Posts: 12 Location: Western NY

Thank You. This is new with this version of IR. I think I'll have another beer and try it again. Once again. Thanks!