1. Device: NEC VT45
2. Type of device: Projector (portable)
3. Year: 2001 (i think)
4. JP1/UEI Remote model: Odyssey URC8200
5. Do you have a JP1 cable? No
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes saw some NEC stuff but not VT45
9. Partially working setup code? No
10. Learning remote question? N/a
I bought the projector with no remote, so here I am.
NEC Code search
Moderator: Moderators
There are a lot of projector models, NEC and other brands, that all use the same basic code set. There is a good chance your VT45 uses that code set.
There are a bunch of OneForAll setup codes for that code set (with minor variations), most of which are not included in most OFA models.
I don't have any info on which setup codes are in the URC8200. TV/0030 and TV/0178 are in a lot of models. Try those. If one of those is present and some key on the URC8200 then operates some function of the projector, that would be a good enough starting point to figure out the rest.
There are a bunch of OneForAll setup codes for that code set (with minor variations), most of which are not included in most OFA models.
I don't have any info on which setup codes are in the URC8200. TV/0030 and TV/0178 are in a lot of models. Try those. If one of those is present and some key on the URC8200 then operates some function of the projector, that would be a good enough starting point to figure out the rest.