Pioneer DVR-450H-S

[stalt]

1. Device: Pioneer DVR-450H-S
2. Type of device: DVD player (HDD/DVD Recorder)
3. Year: 2007
4. JP1/UEI Remote model: URC-9911
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? n/a

[Capn Trips]

Although you used the template, it appears that you didn't REALLY read the entire sticky post associated with it. Otherwise, you would have noticed:

7. Checked the file section?
This is more of a checklist item than a real question. The assumption is that you have checked the file section to see if someone else has created an upgrade for this device but didn't find one. Please provide more details if this is not the case. AND REMEMBER, you don't always need to find the exact model that you have as many manufacturers use the same codeset for all models of a device.

If you have tested the upgrades for similar models and they didn't work, please say so in your post. If you found an upgrade that partially works, please post a link to it. DO NOT refer to upgrades by the setup code number that was used as this is meaningless.

There are at least 5 Pioneer DVD-R upgrades in the DVD upgrade section. Pioneer is very consistent with their use of IR signals. Are you saying that you have tried these and none of them works?

Secondly, your answer to number 10 is illogical (without additional explanation by you). You have the OEM remote, you have a cable, and the 9911 is most certainly a learning remote. Even if none of the upgrades to which I refer above works, you can certainly learn the signals and build an upgrade (unless there is some other reason that you cannot learn with or download/decode from your 9911).