JP1 Remotes

1. Device: Philips 32PW9527
2. Type of device: TV
3. Year: 2003
4. JP1/UEI Remote model: URC-7562 B00
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TV0054, TV0690, TV0556
10. Learning remote question? n/a. No Button on Original Remote.

I'm looking for discrete video input codes AV 1-4 and side

I used this upgrade -TV1054
https://www.hifi-remote.com/forums/dload ... ile_id=953
The discrete power works fine but the discrete inputs do nothing, EFC-178 does brings up a list off all the inputs though.
I can simulate with macro's but its pretty slow

I found pronto files for this tv but neither of them had discretes

Some else has also looked for them:
http://www.remotecentral.com/cgi-bin/mb ... light=9527

any clues or am I out of luck?
Thanks Jeremy

Try these in the order listed. They work on my 1 year old Philips TV.
56
130
210
194
226
138
253
29
188
Good luck, Jack

Great - I had partial success - code 226 gave me AV1.
That code is set to AV4 in 1054 upgrade I use so I should of found it myself.

130 and 194 gave me the AV menu, the rest did nothing.

226 did not turn the TV on alas - is that everyone else's experience with Philips discrete input codes?

Thanks for that
Jeremy

Jeremy, I've been looking at your TV, and notice it has a feature called 'Pixel Plus' (which I don't understand). If I am watching digital TV on my Philips HDTV, I can't switch inputs. I use macros to change the set to analog mode then select the input.

Don't know if that will help you, but it's all I've got.

Did you put a 0 in front of the 2 digit codes? I should have done that...Jack