Erro show up, can't read 1067ABG1 ,1067ABC1

dvbspider · Post by **dvbspider** » Wed Aug 22, 2007 3:08 pm

I am using :

Windows Xp SP2
IR 7.03,IR620

And try to frist read by clicking Download From Remote

"No response from interface.Make sure that the interface is conected to the PC, and that you've specificed correct port"

i have been try with another 1067ABC1 -Comcast same problem

please help

Post by **vickyg2003** » Wed Aug 22, 2007 3:14 pm

Which interface cable do you have? JP1 or JP1.x?

Capn Trips · Post by **Capn Trips** » Wed Aug 22, 2007 3:18 pm

http://www.hifi-remote.com/forums/viewtopic.php?t=5849

Post by **vickyg2003** » Wed Aug 22, 2007 3:33 pm

Actually, I think the 1067 is a JP1.2 remote, although I'm not sure. If so, the battery tricks are not the problem.

Its more likely that
the wrong cable is in use,
the JP1.x button is not selected.
The correct driver hasn't been downloaded.

But I don't know, these remote numbers are pretty difficult for me to keep straight.

Evan_s · Post by **Evan_s** » Wed Aug 22, 2007 3:48 pm

The 1067 is a jp 1.2 remote so shouldn't need any battery tricks.

I'd guess the most likely problem is the wrong cable or bad cable since the JP 1.x cables seem to be pretty reliable otherwise.

Capn Trips · Post by **Capn Trips** » Wed Aug 22, 2007 3:56 pm

OK, have you read this? http://www.hifi-remote.com/forums/viewtopic.php?t=7987

Post by **The Robman** » Wed Aug 22, 2007 8:07 pm

I bet he's using a JP1 cable, which would explain it.

kevin_in_ga · Post by **kevin_in_ga** » Fri Aug 24, 2007 11:19 am

That's the same problem I had with my Comcast URC-1067 - I had bought a JP1 cable (USB) from DIYgadget, which of course did not work with my remote (they were great about returns).

Kevin

dvbspider · Post by **dvbspider** » Sat Aug 25, 2007 1:25 pm

I get , form ebay

DG-JP1-P02

I have been trying changing battery nothing

Post by **vickyg2003** » Sat Aug 25, 2007 1:42 pm

To work with a JP1.2 remote you need this cable

DG-Jp12-01

You have the wrong cable. Click on the link to see the picture.

dvbspider · Post by **dvbspider** » Sat Aug 25, 2007 5:14 pm

vickyg2003 wrote:To work with a JP1.2 remote you need this cable

DG-Jp12-01

You have the wrong cable. Click on the link to see the picture.

Does is a Graphic Schematic to build this cable,,

Thank you very much

Also, I have a Kamaleon 15-2133 , and this remote i was able to read it with out problem..

I have the txt. file code I found here on file section ( Spacestar500)http://www.hifi-remote.com/forums/dload ... le_id=2869how did I load this code to the remote Kamaleom 15-2133

thanks[/url]

Capn Trips · Post by **Capn Trips** » Sat Aug 25, 2007 5:26 pm

The design for the JP1.x interface is HERE.

There are several different processors in the UEIC/JP1 family. Your 15-2133 uses the older, original JP1 interface, which works with your JP1 cable. The 1067s use a newer processor that has a JP1.2 interface. This processor will NOT work with the JP1 cable. You need a JP1.2 cable. Read all about it here.

dvbspider · Post by **dvbspider** » Sat Aug 25, 2007 5:32 pm

.
I am working on this Kamaleon 15-2133 , for now on until i get the JP1.2 jtag..

Can u let me now,, how did i re-program or flash the kamaleon 15-2133 , i do have the code for Satellite Unit Remote, I found it ,here in File section
Spacestar 500 but is in .txt format..

how I can add that code to my kamaleon..

Thanks

Capn Trips · Post by **Capn Trips** » Sat Aug 25, 2007 6:22 pm

http://www.hifi-remote.com/forums/viewtopic.php?t=1009

dvbspider · Post by **dvbspider** » Sun Aug 26, 2007 2:18 am

I am getting a >trying to Download from remote

Bad Checksum at address $0000 Expected $8E $71, but found $65 $9A

How can i fix this problem..

JP1 Remotes

Erro show up, can't read 1067ABG1 ,1067ABC1

Erro show up, can't read 1067ABG1 ,1067ABC1

i have JP1

thanks

Capn thanlks

Bad checksum ERROR