JP1 Remotes

[binky123]

Within IR.exe, Select the Advanced Tabsheet and click on Enable Raw Download. A Raw Download button should appear. Click on this button to download a Raw image from the remote and save this .IR file. Upload this .IR file and provide a link to it in this thread.

[DavidEC2955]

Four three days I kept getting errors when trying to read the codes downloaded from the learing remote..

Tonight when I try to prepair for the upload of the raw data for the remote guru's to view.. everything is working just fine?!?! No errors!?!?

I don't know if I need to add this suggestion here or else where but..
'RM' needs to support Russound protocol.. so that the device number can be set as 00, 01, 02, or 03 for the new DirecTV R/HR15/20/21 DVR's

--David

[aclinml]

Hey guys, your helped another member get this working, but I still can't get it working.

I am working with Keymap-Master, not Remote master.

I have made the Directv changes necessary to make the Directv remote control both HR20s in the same room (second unit has Directv code of 000003).

On the Keymap-Master upgrade, I created the setup code 1379.
The comments in the Notes section of the upgrade.txt does say use D3 as the 'Raw Fixed Data' for the second unit. I tried that and it didn't work. Then I tried to do what I thought Rob indicated in the other thread, under 'Manual Settings' code 'Device1: = 2, and Raw Fixed Data = 23. This did not work either.

What am I missing here, guys????

Thanks for any help,
Mike

[mdavej]

Try leaving device 1 blank, and using raw fixed data = 23. That's what's in Rob's addrs 3 KM file earlier in this thread.

[aclinml]

Worked! thanks for pointing me in the right place, mdavej. I completely missed looking at the files that Rob had created. I appreciate the help!

Mike